Loading ...
Loading ...
Loading ...
23
Temperature Alarm/Door Alarm
• An audible alarm sounds if the storage temperature is not cold enough. The temperature display
flashes at the same time.
• The cause of the temperature being too high may be:
o Warm items were placed inside
o Too much warm ambient air flowed in when rearranging and removing contents
o Power failure for some time
o The appliance is faulty.
• The audible alarm is automatically silenced, and the temperature display stops flashing when the
temperature is sufficiently cold again.
• If the door has been left open for more than 60 seconds, the alarm will sound. Pressing the any
key once will switch off the audible alarm.
DYNAMIC COOLING / SILENT Mode
The appliance has two different running modes. In Silent mode once the required temperature is
reached, the appliance will run without the fan. In Dynamic Cooling mode
t
he fan cycles on and off to
circulate the air even after the required temperature is
reached. This ensures consistent humidity and
temperature distribution in the wine cooler, creating perfect conditions for long term storage.
Using the dynamic mode increases the level of noise in operation.
Door Lock
If the unit is provided with a lock system, the keys are located inside the plastic bag that contains the
User Manual. Insert the key into the lock and turn it counterclockwise to unlock the door. To lock the
door, do the reverse operation, making sure the metal pin is engaged completely. Remove the key
and put it in a secure place for safekeeping.
Shelves for Models:
ASDW2412 / LAWC2431 / ADWC2442 /
SDW2416 / LWC2435 / SDWC2446
To prevent damaging the door gasket, make sure to
have the door all the way open when pulling the
shelves out of the rail compartment.
• Any of the shelves can be removed to store
larger items.
• When removing the shelf from the rail
compartment, make sure to remove all items
first. Press the right slide release lever down
and at the same time lift the corresponding left
slide lever up and pull the drawer out until it is
free of tracks and the cabinet. In order to replace
the shelf, align the left and right slide channels
with the tracks in the cabinet. Ensuring an even track engagement on both sides, gently push the
shelf into the cabinet until it stops.
Loading ...
Loading ...
Loading ...