Snow Joe ION15SB-LT-RM ION15SB-LT-RM - English Manual

Loading ...

Replacing the Plastic Auger

NOTE: When replacing worn plastic plates, pay close attention

to any dierent types of bolts and nuts and where they are

positioned. This will ensure that the new plastic plates are

installed properly and securely.

1. Open the two side covers by removing the 4 screws on

each side (Fig. 24).

2. Remove the belt from the drive wheel (Fig. 25).

3. Remove the drive wheel by turning it clockwise (Fig. 26).

4. Remove the screws and washer on the other side, and

remove the auger axle (Figs. 27 – 28).

5. Remove the old auger from the housing (Fig. 29).

6. Install the replacement auger by following the above steps

in reverse order.

Fig. 24

Screw

Side cover

Fig. 25

Belt

Drive

wheel

Fig. 26

Drive wheel

Fig. 27

Screw

Washer

Fig. 28

Auger axle

Fig. 29

Old auger

Loading ...

Snow Joe ION15SB-LT-RM 40-Volt iONMAX Cordless Single Stage Snow Blower Kit 15-Inch W2.5-Ah Battery and Charger Certified Refurbished