Loading ...
Loading ...
Loading ...
Owner’s Manual
MWRCVR
Wireless Receiver
AtlasIED.com – 4 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Changing Channel / Frequency
1. Press and release SET button until the CHANNEL
|
FREQUENCY page appears (Fig 1).
2. Press UP or DOWN button to select a new channel. As the channel changes, the frequency
changes accordingly (Fig 2).
3. After a channel is chosen, wait 5 seconds to store the setting.
Synchronizing Channels on the Receiver and Transmitter
Align infrared areas of the receiver and microphone within 12" (30cm).
A. Changing the receiver’s channel
1. Press the synchronizing button on the microphone (Fig 4).
2. The microphone’s LED will illuminate, indicating the frequency is being transmitted to the receiver
and that the receiver is synchronizing channels with the microphone (Fig 5).
3. “COPIED BY IRDA” will appear on the receiver’s LCD, indicating that the receiver has been
successfully synchronized (Fig 6).
Figure 1 Figure 2
Figure 3
< 12"
Figure 4 Figure 5
Figure 6
Loading ...
Loading ...
Loading ...