Loading ...
INSTALLATION INSTRUCTIONS
TEST
NOTE
CONNECTION WIRE DIAGRAM
• Switch o the power.
• Unload the lampshade and open it.
• Pass the wire through the hole in the bottom and connect the power wire into the terminal
block according to the connection-wire diagram. Install the lamp at the position where you
need with inflated screws.
• Switch on the power and test it.
• Slide the LUX knob to 50LUX and switch on the power. When you test in the daytime, you
should cover a black opaque cloth on the lamp.
• When the cloth mantles the lampshade, the ambient light is less than about 50LUX, the lamp
will turn on automatically aer about 20s.
• Keep the lamp ON not less than 15s, then when you take away this cloth and the ambient light
gets brighter more than about 150LUX, the lamp will switch o automatically in about 15s.
• Slide the LUX knob to 3LUX, the lamp will turn on when the ambient light is less than 3LUX.
• When you set LUX knob to other marked positions, the lamp will turn on when the ambient
light reaches the required LUX value.
• In front of the lamp, there should be no obstruction aecting it receives natural light.
• The working of lamp may be dierent when installed in a bright or dark place as it works ac-
cording to the condition of ambient light.