Loading ...
Loading ...
Loading ...
EN 10
Pan detection
If the hob does not detect a (ferrous) pan after the cooking power has been set, the pan
detection symbol and the selected power setting will flash alternately in the display and the hob
will remain cold. If a (ferrous) pan is not placed on the cooking zone within 1 minute, the cooking
zone will automatically switch off (see also chapter ‘Pans’).
Using the touch keys
Place the tip of your finger flat on a key or the slider to achieve the best results. You do not
have to apply any pressure. The touch keys only react to the light pressure of a fingertip.
Do not operate the controls with any other objects. Each key or the slider sctivation is followed
by a sound signal.
Indications in the display
In display
Status
Power setting cooking zone; 1 = low setting / 9 = high setting
Boost function active
Automatic heat-up function selected
No (suitable) pan on cooking zone (pan detection symbol)
Child lock function selected
Bridge function selected
Residual heat indicator; The hob has a residual heat indicator for each cooking
zone to show those which are still hot. Although the hob is switched off, the
indicator ‘H’ will remain on for as long as the cooking zone is hot!
Avoid touching them when this indicator is lit. Danger! Risk of burns.
Pause hob operations active.
Fault code; See ‘Troubleshooting table’
Fault code; See ‘Troubleshooting table’
USE
Loading ...
Loading ...
Loading ...