Loading ...
Loading ...
Loading ...
Cauon
RAID requires enterprise-level HDDs.
The funcons in this secon are only available for certain models. It is recommended to use the
same model and capacity HDDs.
There are two ways to create RAID. For one-touch creaon, the default RAID type is RAID5. For
manual creaon, RAID0, RAID1, RAID5, RAID6, and RAID10 can be congured.
Table 9-1 HDD Requirement for Each RAID Type
RAID Type Required Number of HDDs
RAID0 ≥2
RAID1 2
RAID5 ≥3
RAID6 ≥4
RAID10 4 or 8
Note
●
The funcon is only available for certain models.
●
When array excepon event occurs, the corresponding linkage acons can be congured in
System → System Sengs → Excepon .
9.2.1 Create Disk Array
A disk array can be created aer enabling array mode.
Before You Start
●
Storage Mode is set to Quota in System → Storage Management → Storage Mode .
●
Enough HDDs are correctly installed to the device. And HDDs for array creaon are AI or
enterprise level.
Steps
1. Go to System → Storage Management → Storage HDD → Array Management .
2. Click Enable Array Mode, or enable Array Mode.
Network Video Recorder User Manual
35
Loading ...
Loading ...
Loading ...