Loading ...
Loading ...
Loading ...
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
10
Manual Operation (Without Remote Control)
Fig. 12 — Deflector Rod
Fig. 13 — Manual Control Button
CAUTION
Use the following steps to operate the unit manually:
1. Open the front panel of the indoor unit.
2. Locate the MANUAL CONTROL button on the right-hand side of
the unit.
3. Press MANUAL CONTROL one time to activate the FORCED
AUTO mode.
4. Press MANUAL CONTROL again to activate the FORCED
COOLING mode.
5. Press MANUAL CONTROL a third time to turn the unit off.
6. Close the front panel.
Fig. 11 — Range
NOTE: DO NOT move the louver by hand. Doing so takes the louver
out of sync. Should this occur, turn off the unit and unplug it
for a few seconds, then restart the unit. Doing so resets the
louver.
Rang
e
CAUTION
D
eflector
r
od
Manual Control Button
The MANUAL button is intended for testing purposes and
emergency operation only. Do not use this function unless the
remote control is lost and it is absolutely necessary. To restore
regular operation, use the remote control to activate the unit. Unit
must be turned off before initiating the manual operation.
DO NOT put your fingers in or near the blower and suction unit
side of the unit. The high-speed fan inside the unit may cause
injury.
Loading ...
Loading ...
Loading ...