1. Home
  2. Mitsubishi
  3. Mitsubishi 1886150 User Manual
  4. Page 13

User Manual - Page 13

For 1886150.

Loading ...
Loading ...
Loading ...
13
4.Timer
■ Timer functions are different by each remote controller.
■ For details on how to operate the remote controller, refer to the appropriate operation manual included with each remote controller.
Notes:
Anypersonatthefollowingplacescannotbedetected.
● Alongthewallonwhichtheairconditionerisinstalled
● Directlyundertheairconditioner
● Whereanyobstacle,suchasfurniture,isbetweenthepersonand
theairconditioner
Apersonmaynotbedetectedinthefollowingsituations.
● Roomtemperatureishigh.
● Apersonwearsheavyclothesandhis/herskinisnotexposed.
● Aheatingelementofwhichtemperaturechangessignicantlyis
present.
● Someheatsources,suchasasmallchildorpet,maynotbe
sensed.
● Aheatsourcedoesnotmoveforalongtime.
The3Di-seeSensoroperatesonceapproximatelyevery3minutes
tomeasuretheoortemperatureanddetectpersonsintheroom.
● Theintermittentoperatingsoundisanormalsoundproduced
whenthe3Di-seeSensorismoving.
3.7.Ventilation
For LOSSNAY combination
■ The following 2 patterns of operation is available.
• Run the ventilator together with indoor unit.
• Run the ventilator independently.
Notes:(forwirelessremotecontroller)
● Runningtheventilatorindependentlyisnotavailable.
● Noindicationontheremotecontroller.
3.Operation
1 Select the setting with the [F4]
button.
OFF → Cooling only → Heating
only → Cooling/Heating → OFF…
After changing the setting, press
the [SELECT] button to save the
setting.
OFF: The function is disabled.
Cooling only: When the thermostat
turns off during Cool mode, the
vanes move up and down.
Heating only: When the thermo-
stat turns off during Heat mode,
the vanes move to the horizontal
airow direction to circulate the air.
Cooling/Heating: The function is
enabled during both Cool mode
and Heat mode.
* In order to enable this function,
the airow direction must be set to
“Auto”.
3.6.4 Seasonalairowfunction
F1 F2 F3 F4
Seasonal airflow
Select:
Seasonal airflow
Cooling/Heating
Whentheremotecontrollercannotbeused
When the batteries of the remote controller run out or the remote
controller malfunctions, the emergency operation can be done using the
emergency buttons on the grille.
A
DEFROST/STAND BY lamp
B
Operation lamp
C
Emergency operation cooling switch
D
Emergency operation heating switch
E
Receiver
Starting operation
• To operate the cooling mode, press the
button
C
for more than 2
seconds.
• To operate the heating mode, press the button
D
for more than 2
seconds.
• Lighting of the Operation lamp
B
means the start of operation.
Notes:
Detailsofemergencymodeareasshownbelow.
Details of EMERGENCY MODE are as shown below.
Operation mode COOL HEAT
Set temperature 24°C, 75°F 24°C, 75°F
Fan speed High High
Airow direction Horizontal Downward
Stopping operation
• To stop operation, press the
button C or the button D for more than
2 seconds.
5.EmergencyOperationforWirelessRemote-controller
E
C B
B A
BH79D659H01_EN.indd 13 8/5/2016 11:07:25 AM
Loading ...
Loading ...
Loading ...