Loading ...
Loading ...
Loading ...
connect the speaker's wire via the bare wire or banana
Before connecting the power supply, please make sure that
the TDA7498E is in the “OFF” position when connecting to
. Otherwise, there is a “POP” click sound
Before connecting the power supply, please turn down the
Method 2: Banana plugs connection illustration
: Release the banana jacket;
: Loosen the screw;
: Insertion speaker wire and tighten the screw;
: Tighten the banana jacket;
: Insert the banana plug into the horn terminals of the
speaker and amplifier.
Note: Please make sure that the speakers’ wire are not attached
with each other, the speaker connection area is very
narrow, it is easy to cause the positive and negative
speakers’ wires to contact each other, which will result in
no sound output.
Note: Please make sure that the speakers’ wire are not attached
with each other, the speaker connection area is very
narrow, it is easy to cause the positive and negative
speakers’ wires to contact each other, which will result in
no sound output.
1
2
3
4
5
1
2
3
Release Jacket Loosen Screw
Insertion speaker wire
tighten screw
Tighten Jacket
1 2 3 4
banana plug into
the horn terminals
5
Loading ...
Loading ...
Loading ...