Loading ...
Loading ...
Loading ...
ELITE EXECUTIVE OWNER’S MANUAL
18
NOTE: if no station call-sign, will display PI CODE of current station
TUNING SSB(SINGLE SIDE BAND)
SSB enables listening to shortwave two way communications
using the SSB mode such as amateur radio, Morse Code, weather-
fax transmissions and other signals often referred to as ‘utility’
signals. The internet and your local library are great resources to
learn more.
To experience with SSB, turn on the ELITE EXECUTIVE and
position near a window if you are in a building with stories above
you.
1. Turn on 20-meter Amateur band, by pressing 14150kHz with
the keypad and then pressing the AM button to enter it;
2. Quick press SYNC/SSB/RDS button twice to turn on SSB circuit,
i.e. don’t select SYNC. Note SSB appears in the display, then
displays “SSB-USB” or “SSB-LSB”;
3. Repeat quick press U/LSB/RDS MODE button to switch
between USB and LSB.
SSB-USB: upper sideband
SSB-LSB: lower sideband
4. SSB ne tuning: quick press down tuning knob to select tuning
speed as FAST/SLOW/FINE-XX(-99~+99)/STOP, then select
FINE –XX, which appears in the display to enter SSB ne tuning
mode. Rotate the tuning knob to set to it’s the best position.
Put the sensitivity switch, on the left side of the radio, to the
DX position. Fully extend the antenna and with the tuning knob
tune slowly from 14150 to 14350kHz, listening for anything
that sounds like a human voice.
5. Quick press SYNC/SSB/RDS button when nished to turn off
SSB to return to normal receiving status.
USING THE SYNCHRONOUS DETECTOR
The synchronous detector can be used when listening to AM and
shortwave broadcast stations. It may help to minimize interference
and to improve the signal qualitywhile listening to a station, turn
on the ELITE EXECUTIVE, select a AM or SW station, quick press
SYNC/SSB/RDS button to enter SYNC mode, ”SYNC>>>” appears
in the display. Then displays “SYNC_LSB” or “SYNC_USB”, the sync
detector function is on, repeat quick press U/LSB/RDS MODE
button to switch between USB and LSB. Quick press this button
again to turn off SYNC function and return to normal receiving.
Loading ...
Loading ...
Loading ...