Loading ...
Loading ...
Loading ...
Chapter 3 Hardware Panels
XMG-100 Series User’s Guide
16
CHAPTER 3
Hardware Panels
This chapter describes the front panel and rear panel of the Switch and shows you how to make the
hardware connections.
3.1 Front Panel Connections
You can use either crossover or straight-through cables for all the ports.
Refer to Section Table 1 on page 7 for more information on hardware differences between models.
The following figures show the front panels of the Switch.
Figure 7 XMG-105HP
Figure 8 XMG-108
Figure 9 XMG-108HP
You can use unshielded twisted pair (UTP) or shielded twisted-pair (STP) Ethernet cables for RJ-45 ports.
The following table describes the types of network cable used for the different connection speeds.
Table 7 Network Cable Types
TRANSMISSION SPEED NETWORK CABLE TYPE MAXIMUM DISTANCE BANDWIDTH CAPACITY
100 Mbps Category 5 UTP/STP 100 m 100 MHz
1 Gbps Category 5e, 6 UTP/STP 100 m 100 MHz
2.5 Gbps Category 5e, 6 UTP/STP 100 m 100 MHz
Loading ...
Loading ...
Loading ...