Smeg SI1M5633D1 Induction Hob 60 cm

User manual EN - Page 9

For SI1M5633D1.

PDF File Manual, 18 pages, Read Online | Download pdf file

SI1M5633D1 photo
Loading ...
Loading ...
Loading ...
USE - 3191477B096/B
e
diameter indicated is that of the base or the
top,
as the top is almost always larger than the base.
The base of the cookware must be thick and
completely flat. In addition, the hob should
be clean and dry as well.
When preparing dishes with long cooking
times, you can save time and energy by
using a pressure cooker, which also makes it
possible to preserve the vitamins in the food.
Make sure that the pressure cooker contains
enough liquid as, if there is not enough and
it overheats, this may cause damage to both
the pressure cooker and the cooking zone.
If possible, always cover the pans with a
suitable lid.
Choose a pan suitable for the quantity of
food to be cooked. A large, half-empty
saucepan leads to a waste of energy.
Do not use cast-iron cookware or cookware
with a rough base.
Power level table
The power in the cooking zones can be
adjusted to various levels. In the table below
you will find instructions for the different types of
cooking.
Switching on and off
To switch on the hob, hold down the ON/OFF
key for 1 second.
If no cooking zone is activated within 25
seconds of switching on, the hob switches off
automatically.
Using the hob
Adjusting cooking zones
After switching on the display:
1. Position a pan (suitable for induction
cooking and not empty) on the cooking
zone you wish to use.
2. The display corresponding to the zone on
which the container has been placed turns
on automatically and displays .
Adjusting cooking zones
After having placed a pan on the cooking zone
and made sure that the zone has been
activated:
1. Place a finger on the left-hand side of the
scroll bar of the cooking zone to be used.
The power level is now .
2. Move your finger to the left or right to select
the power level from 1 to 9 or enable the
Booster or Double Booster function (see
specific section).
The display of the zone being used will indicate
the selected power level.
Intermediate power levels can be set:
1. Press and hold a power level.
2. A dot appears next to the power level on
the display of the zone selected.
If hob and oven are being used at the
same time, under certain conditions the
maximum power limit that can be used
by your electrical system might be
exceeded.
Power level Suitable for:
0 OFF setting
from 1 to 2
Cooking small amounts of food
(minimum power)
from 3 to 4 Cooking
from 5 to 6
Cooking large quantities of food,
roasting larger portions
from 7 to 8 Roasting, slow frying with flour
9 Roasting
P/
Roasting / browning (maximum
power, see Booster and Double
Booster)
The appliance is fitted with an automatic
pan sensing system.
The power level can also be selected
by pressing the scroll bar at the point
corresponding to the required power
level.
Loading ...
Loading ...
Loading ...