AF500ANZ
Series
OWNER’S GUIDE
XXXL FLEXDRAWER
AIR FRYER WITH MEGAZONE™
ninjakitchen.co.nz
ninjakitchen.com.au
Important Safeguards .................................2
Parts .................................................4
Getting to Know Your Ninja® XXXL FlexDrawer Air Fryer ...5
Functions ...............................................5
Operating Buttons .......................................5
Before First Use .......................................5
Cooking in Your Ninja® XXXL FlexDrawer Air Fryer ........6
Cooking with DualZone
TM
Technology ......................6
Smart Finish ......................................6
Match Cook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Cooking with Two Zones ........................... 7
Cooking in a Single Zone .................................8
Air Fry ...........................................8
Roast ............................................9
Bake .............................................9
Proof ............................................ 10
Reheat .......................................... 10
Dehydrate ........................................11
Keep Warm .......................................11
Pausing Both Zones at the Same Time .....................12
Pausing in a Single Zone During DualZone™ Cooking ........12
Ending the Cook Time in One Zone (while using both zones) ...12
Cooking in the MegaZone™. ................................13
Cleaning Your FlexDrawer Air Fryer ..................... 17
Helpful Tips ......................................... 17
Replacement Parts ................................... 17
Troubleshooting Guide ............................... 18
Warranty ............................................19
TECHNICAL SPECIFICATIONS
Voltage: 220-240V~, 50-60Hz
Watts: 2470W
RECORD THIS INFORMATION
Model Number: �����������������
Serial Number: ������������������
Date of Purchase: ����������������
(Keep receipt)
Store of Purchase: ���������������
REGISTER YOUR PURCHASE
ninjakitchen.com.au
ninjakitchen.co.nz
CONTENTS
THANK YOU
for purchasing the Ninja® XXXL FlexDrawer Air Fryer
1AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
Important Safeguards .................................2
Parts .................................................4
Getting to Know Your Ninja® XXXL FlexDrawer Air Fryer ...5
Functions ...............................................5
Operating Buttons .......................................5
Before First Use .......................................5
Cooking in Your Ninja® XXXL FlexDrawer Air Fryer ........6
Cooking with DualZone
TM
Technology ......................6
Smart Finish ......................................6
Match Cook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Cooking with Two Zones ........................... 7
Cooking in a Single Zone .................................8
Air Fry ...........................................8
Roast ............................................9
Bake .............................................9
Proof ............................................ 10
Reheat .......................................... 10
Dehydrate ........................................11
Keep Warm .......................................11
Pausing Both Zones at the Same Time .....................12
Pausing in a Single Zone During DualZone™ Cooking ........12
Ending the Cook Time in One Zone (while using both zones) ...12
Cooking in the MegaZone™. ................................13
Cleaning Your FlexDrawer Air Fryer ..................... 17
Helpful Tips ......................................... 17
Replacement Parts ................................... 17
Troubleshooting Guide ............................... 18
Warranty ............................................19
TECHNICAL SPECIFICATIONS
Voltage: 220-240V~, 50-60Hz
Watts: 2470W
RECORD THIS INFORMATION
Model Number: �����������������
Serial Number: ������������������
Date of Purchase: ����������������
(Keep receipt)
Store of Purchase: ���������������
REGISTER YOUR PURCHASE
ninjakitchen.com.au
ninjakitchen.co.nz
CONTENTS
THANK YOU
for purchasing the Ninja® XXXL FlexDrawer Air Fryer
1AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY. READ ALL INSTRUCTIONS.
When using electrical appliance, basic safety precautions should always
be followed, including the following:
WARNINGS
1 This appliance can be used by
persons with reduced physical,
sensory or mental capabilities or
lack of experience and knowledge
if they have been given supervision
or instruction concerning use of
the appliance in a safe way and
understand the hazards involved.
2 Keep the appliance and its cord out
of reach of children. DO NOT allow
the appliance to be used by children.
Close supervision is necessary when
used near children
3 Children should not play with
the appliance.
4 NEVER use electrical socket
below counter.
5 NEVER connect this appliance to
an external timer switch or separate
remote-control system.
6 When using this appliance, provide
at least 6 inches (15.25 cm) of space
above and on all sides for air circulation.
7 To protect against electrical shock
DO NOT immerse cord, plugs, or main
unit housing in water or other liquid.
Cook only in the drawer provided .
8 Regularly inspect the appliance
and power cord. DO NOT use the
appliance if there is damage to the
power cord or plug. If the appliance
malfunctions or has been damaged
in any way, immediately stop use
and call Customer Service.
9 DO NOT place appliance on hot
surfaces, near a hot gas or electric
burner, in a heated oven, or on a
stovetop.
10 DO NOT use an extension cord. A
short power-supply cord is used to
reduce the risk of children grabbing
the cord or becoming entangled and
to reduce the risk of people tripping
over a longer cord.
11 ALWAYS ensure the appliance is
properly assembled before use.
12 DO NOT cover the air intake vent
or air outlet while unit is operating.
Doing so will prevent even cooking
and may damage the unit or cause
it to overheat.
13
Before placing removable drawer into
the main unit, ensure drawer and unit are
clean and dry by wiping with a soft cloth.
14 This appliance is for household
use only. DO NOT use this appliance
for anything other than its intended
use. DO NOT use in moving vehicles
or boats. DO NOT use outdoors.
Misuse may cause injury.
15 Intended for worktop use only. Ensure
the surface is level, clean and dry. DO
NOT move the appliance when in use.
16 DO NOT place the appliance near the
edge of a worktop during operation.
17 DO NOT use accessory attachments not
recommended or sold by SharkNinja.
Do not place accessories in a
microwave, toaster oven, convection
oven, or conventional oven or on a
ceramic cooktop, electric coil, gas
burner range or outdoor grill. The
use of accessory attachments not
recommended by SharkNinja may
cause fire, electric shock or injuries.
18 ALWAYS ensure drawer is properly
closed before operating.
19 DO NOT use the appliance without
the removable drawer installed.
20 DO NOT use this appliance for
deep-frying.
21 Prevent food contact with heating
elements. DO NOT overfill when
cooking. Overfilling may cause
personal injury or property damage
or affect the safe use of the appliance.
22 DO NOT place items on top of unit
at any time.
23 Socket voltages can vary, affecting
the performance of your product.
To prevent possible illness, use a
thermometer to check that your
food is cooked to the temperatures
recommended.
24 Should the unit emit black smoke,
unplug immediately. Wait for smoking
to stop before removing any cooking
accessories.
25 DO NOT touch hot surfaces.
Appliance surfaces are hot during
and after operation. To prevent
burns or personal injury, ALWAYS
use protective hot pads or insulated
oven mitts and use available handles.
26 Extreme caution must be used
when the appliance contains hot
food. Improper use may result in
personal injury.
27 Spilled food can cause serious burns.
Keep appliance and cord away from
children. DO NOT let cord hang over
edges of tables or counters or touch
hot surfaces.
28 The drawer and crisper plate become
extremely hot during the cooking
process. Avoid physical contact while
removing the drawer or plate from the
appliance. ALWAYS place drawer or
plate on a heat-resistant surface after
removing. DO NOT touch accessories
during or immediately after cooking.
29 Cleaning and user maintenance
should not be carried out by children.
30 To disconnect, press the power
button to turn off the unit, then
unplug from socket when not in use
and before cleaning. Allow to cool
before cleaning, disassembly, putting
in or taking off parts and storage.
31 DO NOT clean with metal scouring
pads. Pieces can break off the pad
and touch electrical parts, creating
the risk of electric shock.
32 Please refer to the Cleaning &
Maintenance section for regular
maintenance of the appliance.
SAVE THESE INSTRUCTIONS
AU 61 2 8801 7666 | NZ 64 800 112 660
2 3AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
Indicates to read and review instructions to understand operation and use of product.
Indicates the presence of a hazard that can cause personal injury, death or
substantial property damage if the warning included with this symbol is ignored.
Take care to avoid contact with hot surface. Always use hand protection to
avoid burns.
For indoor and household use only.
IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY. READ ALL INSTRUCTIONS.
When using electrical appliance, basic safety precautions should always
be followed, including the following:
WARNINGS
1 This appliance can be used by
persons with reduced physical,
sensory or mental capabilities or
lack of experience and knowledge
if they have been given supervision
or instruction concerning use of
the appliance in a safe way and
understand the hazards involved.
2 Keep the appliance and its cord out
of reach of children. DO NOT allow
the appliance to be used by children.
Close supervision is necessary when
used near children
3 Children should not play with
the appliance.
4 NEVER use electrical socket
below counter.
5 NEVER connect this appliance to
an external timer switch or separate
remote-control system.
6 When using this appliance, provide
at least 6 inches (15.25 cm) of space
above and on all sides for air circulation.
7 To protect against electrical shock
DO NOT immerse cord, plugs, or main
unit housing in water or other liquid.
Cook only in the drawer provided .
8 Regularly inspect the appliance
and power cord. DO NOT use the
appliance if there is damage to the
power cord or plug. If the appliance
malfunctions or has been damaged
in any way, immediately stop use
and call Customer Service.
9 DO NOT place appliance on hot
surfaces, near a hot gas or electric
burner, in a heated oven, or on a
stovetop.
10 DO NOT use an extension cord. A
short power-supply cord is used to
reduce the risk of children grabbing
the cord or becoming entangled and
to reduce the risk of people tripping
over a longer cord.
11 ALWAYS ensure the appliance is
properly assembled before use.
12 DO NOT cover the air intake vent
or air outlet while unit is operating.
Doing so will prevent even cooking
and may damage the unit or cause
it to overheat.
13
Before placing removable drawer into
the main unit, ensure drawer and unit are
clean and dry by wiping with a soft cloth.
14 This appliance is for household
use only. DO NOT use this appliance
for anything other than its intended
use. DO NOT use in moving vehicles
or boats. DO NOT use outdoors.
Misuse may cause injury.
15 Intended for worktop use only. Ensure
the surface is level, clean and dry. DO
NOT move the appliance when in use.
16 DO NOT place the appliance near the
edge of a worktop during operation.
17 DO NOT use accessory attachments not
recommended or sold by SharkNinja.
Do not place accessories in a
microwave, toaster oven, convection
oven, or conventional oven or on a
ceramic cooktop, electric coil, gas
burner range or outdoor grill. The
use of accessory attachments not
recommended by SharkNinja may
cause fire, electric shock or injuries.
18 ALWAYS ensure drawer is properly
closed before operating.
19 DO NOT use the appliance without
the removable drawer installed.
20 DO NOT use this appliance for
deep-frying.
21 Prevent food contact with heating
elements. DO NOT overfill when
cooking. Overfilling may cause
personal injury or property damage
or affect the safe use of the appliance.
22 DO NOT place items on top of unit
at any time.
23 Socket voltages can vary, affecting
the performance of your product.
To prevent possible illness, use a
thermometer to check that your
food is cooked to the temperatures
recommended.
24 Should the unit emit black smoke,
unplug immediately. Wait for smoking
to stop before removing any cooking
accessories.
25 DO NOT touch hot surfaces.
Appliance surfaces are hot during
and after operation. To prevent
burns or personal injury, ALWAYS
use protective hot pads or insulated
oven mitts and use available handles.
26 Extreme caution must be used
when the appliance contains hot
food. Improper use may result in
personal injury.
27 Spilled food can cause serious burns.
Keep appliance and cord away from
children. DO NOT let cord hang over
edges of tables or counters or touch
hot surfaces.
28 The drawer and crisper plate become
extremely hot during the cooking
process. Avoid physical contact while
removing the drawer or plate from the
appliance. ALWAYS place drawer or
plate on a heat-resistant surface after
removing. DO NOT touch accessories
during or immediately after cooking.
29 Cleaning and user maintenance
should not be carried out by children.
30 To disconnect, press the power
button to turn off the unit, then
unplug from socket when not in use
and before cleaning. Allow to cool
before cleaning, disassembly, putting
in or taking off parts and storage.
31 DO NOT clean with metal scouring
pads. Pieces can break off the pad
and touch electrical parts, creating
the risk of electric shock.
32 Please refer to the Cleaning &
Maintenance section for regular
maintenance of the appliance.
SAVE THESE INSTRUCTIONS
AU 61 2 8801 7666 | NZ 64 800 112 660
2 3AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
Indicates to read and review instructions to understand operation and use of product.
Indicates the presence of a hazard that can cause personal injury, death or
substantial property damage if the warning included with this symbol is ignored.
Take care to avoid contact with hot surface. Always use hand protection to
avoid burns.
For indoor and household use only.
PARTS
GETTING TO KNOW YOUR NINJA® XXXL
FLEXDRAWER AIR FRYER
1 Remove and discard any packaging material, promotional labels, and tape from the unit.
2 Remove all accessories from the package and read this manual carefully. Please pay
particular attention to operational instructions, warnings, and important safeguards
to avoid any injury or property damage.
3 Wash the drawer, divider, and crisper plates in hot, soapy water, then rinse and dry
thoroughly. The crisper plates and the divider are the ONLY dishwasher-safe parts.
NEVER clean the main unit in the dishwasher.
BEFORE FIRST USE
FUNCTIONS
AIR FRY: Use this function to give your food
crispiness and crunch with little to no oil.
ROAST: Roast meats to tenderise and
more.
BAKE: Create decadent baked treats
and desserts.
PROOF: Create an environment for dough
to rest and rise.
REHEAT: Warm your leftovers, with
a crispy result.
DEHYDRATE: Dehydrate meats, fruits, and
vegetables for healthy snacks.
KEEP WARM: Reheat or keep cooked food
warm for longer periods of time.
OPERATING BUTTONS
1
Controls the output for the left side of
the drawer.
2
Controls the output for the right side of
the drawer
TEMP arrows: Use the up and down arrows
to adjust the cook temperature before or
during cooking.
TIME arrows: Use the up and down arrows
to adjust the cook time in any function
before or during the cook cycle.
SMART FINISH button: Automatically
syncs the cook times to ensure both zones
finish at the same time, even if there are
dierent cook times.
MATCH COOK button: Automatically
matches Zone 2 settings to those of Zone
1 to cook a larger amount of the same
food, or cook similar foods using the same
function, temperature, and time.
MEGAZONE: Remove the divider to cook
in one unified high-capacity zone.
DIAL: Turn the dial to select a cook function.
POWER BUTTON: The
button turns
the unit on and off and stops all
cooking functions.
Standby Mode: After 10 minutes of no
interaction with the control panel, the unit
will enter standby mode. The Power button
will be dimly lit.
Hold Mode: Hold will appear on the display
while in SMART FINISH mode. One zone
will be cooking, while the other zone will
hold until the times sync.
START/PAUSE button: Start or pause
cooking in the unit.
5AU ninjakitchen.com.au | NZ ninjakitchen.co.nz4
AU 61 2 8801 7666 | NZ 64 800 112 660
Control Panel
Air Intake Vent
Air Outlet
(located on back)
Nonstick Drawer and
Removable Divider
Main Unit
When setting time, the digital display shows HH:MM.
Nonstick
Crisper Plates
NOTE: Carefully install crisper plates to
ensure they are inserted correctly.
PARTS
GETTING TO KNOW YOUR NINJA® XXXL
FLEXDRAWER AIR FRYER
1 Remove and discard any packaging material, promotional labels, and tape from the unit.
2 Remove all accessories from the package and read this manual carefully. Please pay
particular attention to operational instructions, warnings, and important safeguards
to avoid any injury or property damage.
3 Wash the drawer, divider, and crisper plates in hot, soapy water, then rinse and dry
thoroughly. The crisper plates and the divider are the ONLY dishwasher-safe parts.
NEVER clean the main unit in the dishwasher.
BEFORE FIRST USE
FUNCTIONS
AIR FRY: Use this function to give your food
crispiness and crunch with little to no oil.
ROAST: Roast meats to tenderise and
more.
BAKE: Create decadent baked treats
and desserts.
PROOF: Create an environment for dough
to rest and rise.
REHEAT: Warm your leftovers, with
a crispy result.
DEHYDRATE: Dehydrate meats, fruits, and
vegetables for healthy snacks.
KEEP WARM: Reheat or keep cooked food
warm for longer periods of time.
OPERATING BUTTONS
1
Controls the output for the left side of
the drawer.
2
Controls the output for the right side of
the drawer
TEMP arrows: Use the up and down arrows
to adjust the cook temperature before or
during cooking.
TIME arrows: Use the up and down arrows
to adjust the cook time in any function
before or during the cook cycle.
SMART FINISH button: Automatically
syncs the cook times to ensure both zones
finish at the same time, even if there are
dierent cook times.
MATCH COOK button: Automatically
matches Zone 2 settings to those of Zone
1 to cook a larger amount of the same
food, or cook similar foods using the same
function, temperature, and time.
MEGAZONE: Remove the divider to cook
in one unified high-capacity zone.
DIAL: Turn the dial to select a cook function.
POWER BUTTON: The
button turns
the unit on and off and stops all
cooking functions.
Standby Mode: After 10 minutes of no
interaction with the control panel, the unit
will enter standby mode. The Power button
will be dimly lit.
Hold Mode: Hold will appear on the display
while in SMART FINISH mode. One zone
will be cooking, while the other zone will
hold until the times sync.
START/PAUSE button: Start or pause
cooking in the unit.
5AU ninjakitchen.com.au | NZ ninjakitchen.co.nz4
AU 61 2 8801 7666 | NZ 64 800 112 660
Control Panel
Air Intake Vent
Air Outlet
(located on back)
Nonstick Drawer and
Removable Divider
Main Unit
When setting time, the digital display shows HH:MM.
Nonstick
Crisper Plates
NOTE: Carefully install crisper plates to
ensure they are inserted correctly.
4 Press SMART FINISH, then press the
START/PAUSE button to begin cooking
in the zone with the longest time. The
other zone will display Hold. The unit
will beep and activate the second
zone when both zones have the same
time remaining.
5 When cooking is complete, the unit will
beep and “End” will appear on the display.
6 Remove ingredients by dumping them
out or using silicone-tipped tongs/utensils.
DO NOT place drawer on top of unit.
MATCH COOK™
To cook a larger amount of the same food,
or cook dierent foods using the same
function, temperature, and time:
1 Place ingredients in the drawer, then
insert drawer in unit.
2 Zone 1 will remain illuminated. Use the
dial to select the desired cook function.
Use the TEMP arrows to set the
temperature, and use the TIME arrows
to set the time. Make sure to insert the
removable divider before placing your
ingredients.
3 Press the MATCH COOK button to copy
the Zone 1 settings to Zone 2. Then
press the START/PAUSE button to begin
cooking in both zones.
4 “End” will appear on both screens when
cooking ends at the same time.
5 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
COOKING WITH DUALZONE
TM
TECHNOLOGY
DualZone Technology utilises two cooking
zones to increase versatility. The Smart
Finish feature ensures that, regardless of
dierent cook settings, both zones will
finish ready to serve at the same time.
For detailed instructions on using each
function, see pages 8–11.
SMART FINISH™
To finish cooking at the same time when
foods have dierent cook times, temps,
or even functions:
1 Place ingredients in the drawer, then
insert the drawer in unit.
2 Zone 1 will remain illuminated. Use the
dial to select the desired cook function.
Use the TEMP arrows to set the
temperature, and use the TIME arrows
to set the time. Make sure to insert the
removable divider before placing your
ingredients.
3 Select Zone 2, then use the dial to select
the desired cook function. Use the TEMP
arrows to set the temperature, and use
the TIME arrows to set the time.
COOKING WITH TWO ZONES
When Smart Finish or Match Cook are not
selected, technology is integrated into
the design to automatically optimise the
distribution of power when using two zones
with dierent cook times. This means the
food in the zone with the longer cook time
may finish cooking before the set time ends.
Check food frequently to avoid overcooking.
1 Select Zone 1, then use the dial to select
the desired cook function. Use the TEMP
arrows to set the temperature.
2 Use the TIME arrows to set the time.
3 Repeat steps 2 and 3 for Zone 2.
4 Press the START/PAUSE button to begin
cooking in both zones.
5 When cooking is complete in the zone
with the shorter cook time, the power will
then shift to help optimise cook time in
the remaining zone.
6 Continue to monitor food, as it may finish
cooking before the set cook time ends.
7 Remove ingredients by dumping them out
or using silicone-tipped tongs/utensils.
COOKING IN YOUR XXXL FLEXDRAWER AIR FRYER
REFERENCE QUICK START GUIDE FOR RECIPES AND COOKING CHARTS
6 7AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
AU 61 2 8801 7666 | NZ 64 800 112 660
NOTE: If you decide the food in one of
the zones is done cooking before the
cook time is up, you can stop a zone.
Select that zone, then press the START/
PAUSE button to pause the zone or set
the time to zero. See page 12 for further
instructions.
NOTE: It is recommended to shake
your food during cooking. To keep the
time at a synchronised finish, press the
START/PAUSE button to pause both
zones. To pause a single zone during
dual zone cooking, refer to page 12.
NOTE: It is recommended to shake
your food during cooking. To keep the
time at a synchronized finish, Press the
START/PAUSE button to pause both
zones. To pause a single zone during
dual zone cooking, refer to page 12.
NOTE: You can select a dierent
function for Zone 2.
NOTE: There is no preheat needed. Once
you have made your selections, press the
START/PAUSE button to begin cooking.
4 Press SMART FINISH, then press the
START/PAUSE button to begin cooking
in the zone with the longest time. The
other zone will display Hold. The unit
will beep and activate the second
zone when both zones have the same
time remaining.
5 When cooking is complete, the unit will
beep and “End” will appear on the display.
6 Remove ingredients by dumping them
out or using silicone-tipped tongs/utensils.
DO NOT place drawer on top of unit.
MATCH COOK™
To cook a larger amount of the same food,
or cook dierent foods using the same
function, temperature, and time:
1 Place ingredients in the drawer, then
insert drawer in unit.
2 Zone 1 will remain illuminated. Use the
dial to select the desired cook function.
Use the TEMP arrows to set the
temperature, and use the TIME arrows
to set the time. Make sure to insert the
removable divider before placing your
ingredients.
3 Press the MATCH COOK button to copy
the Zone 1 settings to Zone 2. Then
press the START/PAUSE button to begin
cooking in both zones.
4 “End” will appear on both screens when
cooking ends at the same time.
5 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
COOKING WITH DUALZONE
TM
TECHNOLOGY
DualZone Technology utilises two cooking
zones to increase versatility. The Smart
Finish feature ensures that, regardless of
dierent cook settings, both zones will
finish ready to serve at the same time.
For detailed instructions on using each
function, see pages 8–11.
SMART FINISH™
To finish cooking at the same time when
foods have dierent cook times, temps,
or even functions:
1 Place ingredients in the drawer, then
insert the drawer in unit.
2 Zone 1 will remain illuminated. Use the
dial to select the desired cook function.
Use the TEMP arrows to set the
temperature, and use the TIME arrows
to set the time. Make sure to insert the
removable divider before placing your
ingredients.
3 Select Zone 2, then use the dial to select
the desired cook function. Use the TEMP
arrows to set the temperature, and use
the TIME arrows to set the time.
COOKING WITH TWO ZONES
When Smart Finish or Match Cook are not
selected, technology is integrated into
the design to automatically optimise the
distribution of power when using two zones
with dierent cook times. This means the
food in the zone with the longer cook time
may finish cooking before the set time ends.
Check food frequently to avoid overcooking.
1 Select Zone 1, then use the dial to select
the desired cook function. Use the TEMP
arrows to set the temperature.
2 Use the TIME arrows to set the time.
3 Repeat steps 2 and 3 for Zone 2.
4 Press the START/PAUSE button to begin
cooking in both zones.
5 When cooking is complete in the zone
with the shorter cook time, the power will
then shift to help optimise cook time in
the remaining zone.
6 Continue to monitor food, as it may finish
cooking before the set cook time ends.
7 Remove ingredients by dumping them out
or using silicone-tipped tongs/utensils.
COOKING IN YOUR XXXL FLEXDRAWER AIR FRYER
REFERENCE QUICK START GUIDE FOR RECIPES AND COOKING CHARTS
6 7AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
AU 61 2 8801 7666 | NZ 64 800 112 660
NOTE: If you decide the food in one of
the zones is done cooking before the
cook time is up, you can stop a zone.
Select that zone, then press the START/
PAUSE button to pause the zone or set
the time to zero. See page 12 for further
instructions.
NOTE: It is recommended to shake
your food during cooking. To keep the
time at a synchronised finish, press the
START/PAUSE button to pause both
zones. To pause a single zone during
dual zone cooking, refer to page 12.
NOTE: It is recommended to shake
your food during cooking. To keep the
time at a synchronized finish, Press the
START/PAUSE button to pause both
zones. To pause a single zone during
dual zone cooking, refer to page 12.
NOTE: You can select a dierent
function for Zone 2.
NOTE: There is no preheat needed. Once
you have made your selections, press the
START/PAUSE button to begin cooking.
COOKING IN A SINGLE ZONE
For instructions on using both zones at the
same time, see pages 6–7.
To turn on the unit, plug the power cord into a
wall outlet, then press the power
button.
Air Fry
1 Install divider in the middle of the drawer.
2 Install the crisper plates in the drawer.
Place ingredients in the drawer, then
insert drawer in unit.
.
3 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2). Select
AIR FRY.
4 Use the TEMP arrows to set the desired
temperature.
5 Use the TIME arrows to set the time
in 1-minute increments up to 1 hour.
Press the START/PAUSE button to begin
cooking.
6 When cooking is complete, the unit will
beep and “End” will appear on the display.
7 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
COOKING IN YOUR XXXL FLEXDRAWER AIR FRYER – CONT.
Bake
1 Install divider in the middle of the drawer.
2 Install the crisper plates in the drawer.
Place ingredients in the drawer, then
insert drawer in unit.
3 The unit will default to Zone 1 (to
use Zone 2 instead, select Zone 2).
Use the dial to select BAKE.
4 Use the TEMP arrows to set the desired
temperature.
5 Use the TIME arrows to set the time in
1-minute increments up to 1 hour and in
5-minute increments from 1 to 4 hours.
Press the START/PAUSE button to begin
cooking.
6 When cooking is complete, the unit will
beep and “End” will appear on the display.
7 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
NOTE: To convert recipes from a traditional
oven, reduce the temperature by 12°C.
Roast
1 Install divider in the middle of the drawer.
2 Install the crisper plates in the drawer.
Place ingredients in the drawer, then
insert drawer in unit.
3 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2). Use the
dial to select ROAST.
4 Use the TEMP arrows to set the desired
temperature.
5 Use the TIME arrows to set the time in
1-minute increments up to 1 hour and in
5-minute increments from 1 to 4 hours.
Press the START/PAUSE button to
begin cooking.
6 When cooking is complete, the unit will
beep and “End” will appear on the display.
7 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
8 9AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
AU 61 2 8801 7666 | NZ 64 800 112 660
NOTE: During cooking, you can remove
the drawer and shake or toss ingredients
for evening crisping. If you would like to
pause during this time, press the zone
number, then press the START/PAUSE
button. If using a single zone, press the
START/PAUSE button.
COOKING IN A SINGLE ZONE
For instructions on using both zones at the
same time, see pages 6–7.
To turn on the unit, plug the power cord into a
wall outlet, then press the power
button.
Air Fry
1 Install divider in the middle of the drawer.
2 Install the crisper plates in the drawer.
Place ingredients in the drawer, then
insert drawer in unit.
.
3 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2). Select
AIR FRY.
4 Use the TEMP arrows to set the desired
temperature.
5 Use the TIME arrows to set the time
in 1-minute increments up to 1 hour.
Press the START/PAUSE button to begin
cooking.
6 When cooking is complete, the unit will
beep and “End” will appear on the display.
7 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
COOKING IN YOUR XXXL FLEXDRAWER AIR FRYER – CONT.
Bake
1 Install divider in the middle of the drawer.
2 Install the crisper plates in the drawer.
Place ingredients in the drawer, then
insert drawer in unit.
3 The unit will default to Zone 1 (to
use Zone 2 instead, select Zone 2).
Use the dial to select BAKE.
4 Use the TEMP arrows to set the desired
temperature.
5 Use the TIME arrows to set the time in
1-minute increments up to 1 hour and in
5-minute increments from 1 to 4 hours.
Press the START/PAUSE button to begin
cooking.
6 When cooking is complete, the unit will
beep and “End” will appear on the display.
7 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
NOTE: To convert recipes from a traditional
oven, reduce the temperature by 12°C.
Roast
1 Install divider in the middle of the drawer.
2 Install the crisper plates in the drawer.
Place ingredients in the drawer, then
insert drawer in unit.
3 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2). Use the
dial to select ROAST.
4 Use the TEMP arrows to set the desired
temperature.
5 Use the TIME arrows to set the time in
1-minute increments up to 1 hour and in
5-minute increments from 1 to 4 hours.
Press the START/PAUSE button to
begin cooking.
6 When cooking is complete, the unit will
beep and “End” will appear on the display.
7 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
8 9AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
AU 61 2 8801 7666 | NZ 64 800 112 660
NOTE: During cooking, you can remove
the drawer and shake or toss ingredients
for evening crisping. If you would like to
pause during this time, press the zone
number, then press the START/PAUSE
button. If using a single zone, press the
START/PAUSE button.
10 11AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
AU 61 2 8801 7666 | NZ 64 800 112 660
Proof
1 Install divider in the middle of the drawer.
2 Install the crisper plates in the drawer.
Place ingredients in the drawer, then
insert drawer in unit.
3 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2). Select
PROOF.
4 Use the TEMP arrows to set the desired
temperature.
5 Use the TIME arrows to set the time in
1-minute increments up to 30 minutes.
Press the START/PAUSE button to
begin proofing.
6 When proofing is complete, the unit will
beep and “End” will appear on the display.
7 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
COOKING IN YOUR XXXL FLEXDRAWER AIR FRYER – CONT.
Reheat
1 Install divider in the middle of the drawer.
2 Install the crisper plates in the drawer.
Place ingredients in the drawer, then
insert drawer in unit.
3 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2). Use the
dial to select REHEAT.
4 Use the TEMP arrows to set the desired
temperature.
5 Use the TIME arrows to set the time
in 1-minute increments up to 1 hour.
Press the START/PAUSE button to
begin reheating.
6 When reheating is complete, the unit will
beep and “End” will appear on the display.
7 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
Keep Warm
1 Install divider in the middle of the drawer.
2 Install the crisper plates in the drawer.
Place ingredients in the drawer, then
insert drawer in unit.
3 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2). Use the
dial to select KEEP WARM.
4 Temp will default to 60°C to ensure food
is kept warm at a safe temperature.
5 Press the START/PAUSE button to begin
warming. Timer will count up from 00:00.
6 When you’re ready to serve your
food, remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
Dehydrate
1 Install divider in the middle of the drawer.
2 Install the crisper plates in the drawer.
Place ingredients in the drawer, then
insert drawer in unit.
3 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2). Use the
dial to select DEHYDRATE. The default
temperature will appear on the display.
4 Use the TEMP arrows to set the desired
temperature.
5 Use the TIME arrows to set the time in
15-minute increments from 1 to 12 hours.
Press the START/PAUSE button to
begin dehydrating.
6 When dehydrating is complete, the unit
will beep and “End” will appear on the
display.
7 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
10 11AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
AU 61 2 8801 7666 | NZ 64 800 112 660
Proof
1 Install divider in the middle of the drawer.
2 Install the crisper plates in the drawer.
Place ingredients in the drawer, then
insert drawer in unit.
3 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2). Select
PROOF.
4 Use the TEMP arrows to set the desired
temperature.
5 Use the TIME arrows to set the time in
1-minute increments up to 30 minutes.
Press the START/PAUSE button to
begin proofing.
6 When proofing is complete, the unit will
beep and “End” will appear on the display.
7 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
COOKING IN YOUR XXXL FLEXDRAWER AIR FRYER – CONT.
Reheat
1 Install divider in the middle of the drawer.
2 Install the crisper plates in the drawer.
Place ingredients in the drawer, then
insert drawer in unit.
3 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2). Use the
dial to select REHEAT.
4 Use the TEMP arrows to set the desired
temperature.
5 Use the TIME arrows to set the time
in 1-minute increments up to 1 hour.
Press the START/PAUSE button to
begin reheating.
6 When reheating is complete, the unit will
beep and “End” will appear on the display.
7 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
Keep Warm
1 Install divider in the middle of the drawer.
2 Install the crisper plates in the drawer.
Place ingredients in the drawer, then
insert drawer in unit.
3 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2). Use the
dial to select KEEP WARM.
4 Temp will default to 60°C to ensure food
is kept warm at a safe temperature.
5 Press the START/PAUSE button to begin
warming. Timer will count up from 00:00.
6 When you’re ready to serve your
food, remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
Dehydrate
1 Install divider in the middle of the drawer.
2 Install the crisper plates in the drawer.
Place ingredients in the drawer, then
insert drawer in unit.
3 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2). Use the
dial to select DEHYDRATE. The default
temperature will appear on the display.
4 Use the TEMP arrows to set the desired
temperature.
5 Use the TIME arrows to set the time in
15-minute increments from 1 to 12 hours.
Press the START/PAUSE button to
begin dehydrating.
6 When dehydrating is complete, the unit
will beep and “End” will appear on the
display.
7 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
12 13AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
AU 61 2 8801 7666 | NZ 64 800 112 660
COOKING IN YOUR XXXL FLEXDRAWER AIR FRYER – CONT.
COOKING IN THE MEGAZONE™
For instructions on using both zones at the
same time, see pages 6–7.
To turn on the unit, plug the power cord into a
wall outlet, then press the power
button.
Air Fry
1 Remove divider from the the drawer,
then install crisper plates. Place
ingredients in the drawer, theninsert
drawer in unit.
2 The unit will default to Zone 1. Select
MEGAZONE to activate the MEGAZONE.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time
in 1-minute increments up to 1 hour.
Press the START/PAUSE button to
begin cooking.
5 When cooking is complete, the unit will
beep and “End” will appear on the display.
6 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
PAUSING BOTH ZONES
AT THE SAME TIME
1 To pause time in the SMART FINISH
mode, or to pause both zones in dual
zone cooking, press the START/PAUSE
button
2 To resume cooking, press the
START/PAUSE button again.
PAUSING A SINGLE ZONE
DURING DUALZONE™ COOKING
1 To pause time in a single zone while
both zones are running, select the zone
you want to pause, then press
the START/PAUSE button.
2 To resume cooking, press the START/
PAUSE button again.
ENDING THE COOK TIME IN ONE
ZONE (WHILE USING BOTH ZONES)
1 Select the zone you would like to stop.
2 Then press the down TIME arrow to
set the time to zero.
3 Once you have set the time to zero,
press the START/PAUSE button.
4 The time in that zone is then cancelled,
and “End” will appear on the display.
Cooking will continue in the other zone.
12 13AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
AU 61 2 8801 7666 | NZ 64 800 112 660
COOKING IN YOUR XXXL FLEXDRAWER AIR FRYER – CONT.
COOKING IN THE MEGAZONE™
For instructions on using both zones at the
same time, see pages 6–7.
To turn on the unit, plug the power cord into a
wall outlet, then press the power
button.
Air Fry
1 Remove divider from the the drawer,
then install crisper plates. Place
ingredients in the drawer, theninsert
drawer in unit.
2 The unit will default to Zone 1. Select
MEGAZONE to activate the MEGAZONE.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time
in 1-minute increments up to 1 hour.
Press the START/PAUSE button to
begin cooking.
5 When cooking is complete, the unit will
beep and “End” will appear on the display.
6 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
PAUSING BOTH ZONES
AT THE SAME TIME
1 To pause time in the SMART FINISH
mode, or to pause both zones in dual
zone cooking, press the START/PAUSE
button
2 To resume cooking, press the
START/PAUSE button again.
PAUSING A SINGLE ZONE
DURING DUALZONE™ COOKING
1 To pause time in a single zone while
both zones are running, select the zone
you want to pause, then press
the START/PAUSE button.
2 To resume cooking, press the START/
PAUSE button again.
ENDING THE COOK TIME IN ONE
ZONE (WHILE USING BOTH ZONES)
1 Select the zone you would like to stop.
2 Then press the down TIME arrow to
set the time to zero.
3 Once you have set the time to zero,
press the START/PAUSE button.
4 The time in that zone is then cancelled,
and “End” will appear on the display.
Cooking will continue in the other zone.
COOKING IN YOUR XXXL FLEXDRAWER AIR FRYER – CONT.
14 15AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
AU 61 2 8801 7666 | NZ 64 800 112 660
2 The unit will will default to Zone 1. Select
MEGAZONE to activate the MEGAZONE.
Use the dial to select BAKE.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time in
1-minute increments up to 1 hour and in
5-minute increments from 1 to 4 hours.
Press the START/PAUSE button to begin
cooking.
5 When cooking is complete, the unit will
beep and “End” will appear on the display.
6 Remove ingredients by dumping them out
or using silicone-tipped tongs/utensils.
NOTE: To convert recipes from a traditional
oven, reduce the temperature by 12°C.
Roast
1 Remove divider from the the drawer,
then install crisper plates. Place
ingredients in the drawer, then
insert drawer in unit.
2 The unit will default to Zone 1. Select
MEGAZONE to activate the MEGAZONE.
Use the dial to select ROAST.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time in
1-minute increments up to 1 hour and in
5-minute increments from 1 to 4 hours.
Press the START/PAUSE button to
begin cooking.
5 When cooking is complete, the unit will
beep and “End” will appear on the display.
6 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
Bake
1 Remove divider from the the drawer,
then install crisper plates. Place
ingredients in the drawer, then
insert drawer in unit.
Proof
1 Remove divider from the the drawer,
then install crisper plates. Place
ingredients in the drawer, then
insert drawer in unit.
2 The unit will default to Zone 1. Select
MEGAZONE to activate the MEGAZONE.
Use the dial to select PROOF.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time in
1-minute increments up to 30 minutes.
Press the START/PAUSE button to
begin proofing.
5 When proofing is complete, the unit will
beep and “End” will appear on the display.
6 Remove ingredients by dumping them out
or using silicone-tipped tongs/utensils.
Reheat
1 Remove divider from the the drawer,
then install crisper plates. Place
ingredients in the drawer, then
insert drawer in unit.
2 The unit will default to Zone 1.
Select MEGAZONE to activate the
MEGAZONE. Use the dial to select
REHEAT.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time
in 1-minute increments up to 1 hour.
Press the START/PAUSE button to
begin reheating.
5 When reheating is complete, the unit will
beep and “End” will appear on the display.
6 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
COOKING IN YOUR XXXL FLEXDRAWER AIR FRYER – CONT.
14 15AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
AU 61 2 8801 7666 | NZ 64 800 112 660
2 The unit will will default to Zone 1. Select
MEGAZONE to activate the MEGAZONE.
Use the dial to select BAKE.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time in
1-minute increments up to 1 hour and in
5-minute increments from 1 to 4 hours.
Press the START/PAUSE button to begin
cooking.
5 When cooking is complete, the unit will
beep and “End” will appear on the display.
6 Remove ingredients by dumping them out
or using silicone-tipped tongs/utensils.
NOTE: To convert recipes from a traditional
oven, reduce the temperature by 12°C.
Roast
1 Remove divider from the the drawer,
then install crisper plates. Place
ingredients in the drawer, then
insert drawer in unit.
2 The unit will default to Zone 1. Select
MEGAZONE to activate the MEGAZONE.
Use the dial to select ROAST.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time in
1-minute increments up to 1 hour and in
5-minute increments from 1 to 4 hours.
Press the START/PAUSE button to
begin cooking.
5 When cooking is complete, the unit will
beep and “End” will appear on the display.
6 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
Bake
1 Remove divider from the the drawer,
then install crisper plates. Place
ingredients in the drawer, then
insert drawer in unit.
Proof
1 Remove divider from the the drawer,
then install crisper plates. Place
ingredients in the drawer, then
insert drawer in unit.
2 The unit will default to Zone 1. Select
MEGAZONE to activate the MEGAZONE.
Use the dial to select PROOF.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time in
1-minute increments up to 30 minutes.
Press the START/PAUSE button to
begin proofing.
5 When proofing is complete, the unit will
beep and “End” will appear on the display.
6 Remove ingredients by dumping them out
or using silicone-tipped tongs/utensils.
Reheat
1 Remove divider from the the drawer,
then install crisper plates. Place
ingredients in the drawer, then
insert drawer in unit.
2 The unit will default to Zone 1.
Select MEGAZONE to activate the
MEGAZONE. Use the dial to select
REHEAT.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time
in 1-minute increments up to 1 hour.
Press the START/PAUSE button to
begin reheating.
5 When reheating is complete, the unit will
beep and “End” will appear on the display.
6 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
16
AU 61 2 8801 7666 | NZ 64 800 112 660
17AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
CLEANING YOUR XXXL FLEXDRAWER AIR FRYER
HELPFUL TIPS
1 For consistent browning, make sure
ingredients are arranged in an even
layer on the bottom of the drawer
with no overlapping. If ingredients are
overlapping, make sure to shake them
halfway through cooking.
2 Cook temperature and time can be
adjusted at any time during cooking.
Simply select the zone you want to
adjust, then press the TEMP arrows
to adjust the temperature or the TIME
arrows to adjust the time.
3 To convert recipes from a traditional
oven, reduce the temperature by -4°C.
Check food frequently to avoid overcooking.
4 Occasionally, the fan from the air fryer
will blow lightweight foods around.
To alleviate this, secure foods (like the
top slice of bread on a sandwich) with
wooden toothpicks.
5 The crisper plates elevate ingredients
in the drawer so air can circulate
under and around ingredients for
even, crisp results.
6 After selecting a cooking function, press
the START/PAUSE button to begin
cooking immediately. The unit will run
at the default temperature and time.
7 For best results with fresh vegetables
and potatoes, use at least 1 tablespoon
of oil. Add more oil as desired to achieve
the preferred level of crispiness.
8 For best results, check progress
throughout cooking and remove food
when desired level of brownness has
been achieved. We recommend using
an instant-read thermometer to monitor
the internal temperature of proteins.
9 For best results, remove food directly after
the cook time ends to avoid overcooking.
REPLACEMENT PARTS
To order additional parts and accessories, visit AU ninjakitchen.com.au NZ ninjakitchen.co.nz
or contact Customer Service at AU 61 2 8801 7666,
NZ 64 800 112 660.
The unit should be cleaned thoroughly after every use.
Unplug the unit from the wall outlet before cleaning.
Part/Accessory Cleaning Method Dishwasher Safe?
Main Unit
To clean the main unit and the control panel,
wipe them clean with a damp cloth.
NOTE: NEVER immerse the main unit in water
or any other liquid. NEVER clean the main unit
in a dishwasher.
No
Crisper Plates
The crisper plates can be washed in the
dishwasher or by hand. If hand-washing,
air-dry or towel-dry all parts after cleaning.
Yes
Drawer
The drawer can be washed in the dishwasher or
by hand. If hand-washing, air-dry or towel-dry all
parts after cleaning. *To extend the life of your
drawer, we recommend hand-washing them.
Yes*
Divider
The divider can be washed in the dishwasher or
by hand. If hand-washing, air-dry or towel-dry
all parts after cleaning.
Yes
If food residue is stuck on the crisper plates or drawer, place them in a sink filled
with warm, soapy water and allow to soak.
Keep Warm
1 Remove divider from the the drawer,
then install crisper plates. Place
ingredients in the drawer, then insert
drawer in unit.
2 The unit will default to Zone 1.
Select MEGAZONE to activate
the MEGAZONE.
3 Temp will default to 60° C to ensure
food is kept warm at a safe temperature.
4 Press the START/PAUSE button to begin.
Timer will count up from 00:00.
5 When you’re ready to serve your
food, remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
Dehydrate
1 Remove divider from the the drawer,
then install crisper plates. Place
ingredients in the drawer, then
insert drawer in unit.
2 The unit will default to Zone 1. Select
MEGAZONE to activate the MEGAZONE.
Use the dial to select DEHYDRATE.
3 The default temperature will appear on
the display. Use the TEMP arrows to set
the desired temperature.
4 Use the TIME arrows to set the time in
15-minute increments from 1 to 12 hours.
Press the START/PAUSE button to
begin dehydrating.
5 When dehydrating is complete, the unit
will beep and “End” will appear on the
display.
6 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
16
AU 61 2 8801 7666 | NZ 64 800 112 660
17AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
CLEANING YOUR XXXL FLEXDRAWER AIR FRYER
HELPFUL TIPS
1 For consistent browning, make sure
ingredients are arranged in an even
layer on the bottom of the drawer
with no overlapping. If ingredients are
overlapping, make sure to shake them
halfway through cooking.
2 Cook temperature and time can be
adjusted at any time during cooking.
Simply select the zone you want to
adjust, then press the TEMP arrows
to adjust the temperature or the TIME
arrows to adjust the time.
3 To convert recipes from a traditional
oven, reduce the temperature by -4°C.
Check food frequently to avoid overcooking.
4 Occasionally, the fan from the air fryer
will blow lightweight foods around.
To alleviate this, secure foods (like the
top slice of bread on a sandwich) with
wooden toothpicks.
5 The crisper plates elevate ingredients
in the drawer so air can circulate
under and around ingredients for
even, crisp results.
6 After selecting a cooking function, press
the START/PAUSE button to begin
cooking immediately. The unit will run
at the default temperature and time.
7 For best results with fresh vegetables
and potatoes, use at least 1 tablespoon
of oil. Add more oil as desired to achieve
the preferred level of crispiness.
8 For best results, check progress
throughout cooking and remove food
when desired level of brownness has
been achieved. We recommend using
an instant-read thermometer to monitor
the internal temperature of proteins.
9 For best results, remove food directly after
the cook time ends to avoid overcooking.
REPLACEMENT PARTS
To order additional parts and accessories, visit AU ninjakitchen.com.au NZ ninjakitchen.co.nz
or contact Customer Service at AU 61 2 8801 7666,
NZ 64 800 112 660.
The unit should be cleaned thoroughly after every use.
Unplug the unit from the wall outlet before cleaning.
Part/Accessory Cleaning Method Dishwasher Safe?
Main Unit
To clean the main unit and the control panel,
wipe them clean with a damp cloth.
NOTE: NEVER immerse the main unit in water
or any other liquid. NEVER clean the main unit
in a dishwasher.
No
Crisper Plates
The crisper plates can be washed in the
dishwasher or by hand. If hand-washing,
air-dry or towel-dry all parts after cleaning.
Yes
Drawer
The drawer can be washed in the dishwasher or
by hand. If hand-washing, air-dry or towel-dry all
parts after cleaning. *To extend the life of your
drawer, we recommend hand-washing them.
Yes*
Divider
The divider can be washed in the dishwasher or
by hand. If hand-washing, air-dry or towel-dry
all parts after cleaning.
Yes
If food residue is stuck on the crisper plates or drawer, place them in a sink filled
with warm, soapy water and allow to soak.
Keep Warm
1 Remove divider from the the drawer,
then install crisper plates. Place
ingredients in the drawer, then insert
drawer in unit.
2 The unit will default to Zone 1.
Select MEGAZONE to activate
the MEGAZONE.
3 Temp will default to 60° C to ensure
food is kept warm at a safe temperature.
4 Press the START/PAUSE button to begin.
Timer will count up from 00:00.
5 When you’re ready to serve your
food, remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
Dehydrate
1 Remove divider from the the drawer,
then install crisper plates. Place
ingredients in the drawer, then
insert drawer in unit.
2 The unit will default to Zone 1. Select
MEGAZONE to activate the MEGAZONE.
Use the dial to select DEHYDRATE.
3 The default temperature will appear on
the display. Use the TEMP arrows to set
the desired temperature.
4 Use the TIME arrows to set the time in
15-minute increments from 1 to 12 hours.
Press the START/PAUSE button to
begin dehydrating.
5 When dehydrating is complete, the unit
will beep and “End” will appear on the
display.
6 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
18
AU 61 2 8801 7666 | NZ 64 800 112 660
TROUBLESHOOTING GUIDE WARRANTY
• How do I adjust the temperature or time while using a single zone?
When a single zone is running the time or temperature can be adjusted at any time by
pressing the up/down arrows.
• How do I adjust the temperature or time while using both zones?
Select the desired zone, then use the TEMP arrows to adjust the temperature or the
TIME arrows to adjust the time.
• Can I cook dierent foods in each zone and not worry about cross contamination?
Yes, both zones are self-contained with separate heating elements and fans.
• How do I pause or stop one zone when using both zones?
Select the zone you want to pause or stop, then press the START/PAUSE button
• Is the drawer safe to put on my countertop?
The drawer will heat up during cooking. Use caution when handling, and place them on
heat-safe surfaces only. DO NOT place the drawer on top of the unit.
• When should I use the crisper plate?
Use the crisper plate when you want food to come out crispy. The plate elevates the
food in the drawer so that air can flow under and around it to cook ingredients evenly.
• Why didn’t my food cook fully?
Make sure the drawer is fully inserted during cooking. For consistent browning, make
sure ingredients are arranged in an even layer on the bottom of the drawer with no
overlapping. Shake drawer to toss ingredients for even crispiness. Cook temperature
and time can be adjusted at any time during cooking. Simply use the TEMP arrows to
adjust the temperature or the TIME arrows to adjust the time.
• Why is my food burned?
For best results, check progress throughout cooking and remove food when desired
level of brownness has been achieved. Remove food immediately after the cook time
ends to avoid overcooking.
• Why do some ingredients blow around when air frying?
Occasionally, the fan from the air fryer will blow lightweight foods around. Use wooden
toothpicks to secure loose lightweight food, like the top slice of bread on a sandwich.
• Can I air fry wet, battered ingredients?
Yes, but use the proper breading technique. It is important to coat foods first with flour,
then with egg, and then with bread crumbs. Press breading firmly onto the battered
ingredients, so crumbs won’t be blown o by the fan.
• Why did the display screen go black?
The unit is in standby mode. Press the power
button to turn it back on.
• Why is the unit beeping?
Either the food is done cooking, or the other zone has started cooking.
• Why is there an “E” message on the display screen?
The unit is not functioning properly. Please contact Customer Service at
AU 61 2 8801 7666, NZ 64 800 112 660
.
19AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
ONE (1) YEAR LIMITED REPLACEMENT WARRANTY
For guarantee claims, you will need to submit a proof of purchase in the form of a valid
receipt that displays date and place of purchase. This warranty does not replace but is in
addition to your statutory rights.
If your product becomes defective due to faulty material or workmanship within a period
of 1 year from the date of purchase, we warrant to do the following:
• For New Zealand Consumers: We will replace the defective/faulty part with a new
product, free of charge, or if the unit is deemed defective/faulty we replace the unit
with an equivalent or upgraded model, at our discretion.
• For Australian Consumers: Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a replacement or refund for
a major failure and for compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a major failure.
Replacement items will be covered by the limited warranty for the balance of the
warranty period
from the date of the original purchase. Please note: Your warranty is
subject to the following conditions.
• DO NOT operate the appliance with a damaged plug or cord, or if the unit has been
dropped, damaged or dropped in water.
• To avoid the risk of electric shock, do not disassemble or attempt to repair the
appliance on your own. If the supply cord is damaged, it must be replaced by a
qualified electrician to avoid a hazard. Incorrect re-assembly or repair can cause a risk
of electric shock or injury to persons when the appliance is used.
• The item has not been misused, abused, neglected, altered, modified or repaired
by anyone.
• The item has been subjected to fair wear and tear.
• The item has not been used for trade, professional or hire purposes.
• The item has not sustained damage through foreign objects, substances or accident
What is not covered?
• Accessories supplied with the item.
• Components that are subject to natural wear and tear caused by normal use in
accordance with operating instructions.
• Unauthorised/improper maintenance/handling or overload is excluded from this
warranty.
18
AU 61 2 8801 7666 | NZ 64 800 112 660
TROUBLESHOOTING GUIDE WARRANTY
• How do I adjust the temperature or time while using a single zone?
When a single zone is running the time or temperature can be adjusted at any time by
pressing the up/down arrows.
• How do I adjust the temperature or time while using both zones?
Select the desired zone, then use the TEMP arrows to adjust the temperature or the
TIME arrows to adjust the time.
• Can I cook dierent foods in each zone and not worry about cross contamination?
Yes, both zones are self-contained with separate heating elements and fans.
• How do I pause or stop one zone when using both zones?
Select the zone you want to pause or stop, then press the START/PAUSE button
• Is the drawer safe to put on my countertop?
The drawer will heat up during cooking. Use caution when handling, and place them on
heat-safe surfaces only. DO NOT place the drawer on top of the unit.
• When should I use the crisper plate?
Use the crisper plate when you want food to come out crispy. The plate elevates the
food in the drawer so that air can flow under and around it to cook ingredients evenly.
• Why didn’t my food cook fully?
Make sure the drawer is fully inserted during cooking. For consistent browning, make
sure ingredients are arranged in an even layer on the bottom of the drawer with no
overlapping. Shake drawer to toss ingredients for even crispiness. Cook temperature
and time can be adjusted at any time during cooking. Simply use the TEMP arrows to
adjust the temperature or the TIME arrows to adjust the time.
• Why is my food burned?
For best results, check progress throughout cooking and remove food when desired
level of brownness has been achieved. Remove food immediately after the cook time
ends to avoid overcooking.
• Why do some ingredients blow around when air frying?
Occasionally, the fan from the air fryer will blow lightweight foods around. Use wooden
toothpicks to secure loose lightweight food, like the top slice of bread on a sandwich.
• Can I air fry wet, battered ingredients?
Yes, but use the proper breading technique. It is important to coat foods first with flour,
then with egg, and then with bread crumbs. Press breading firmly onto the battered
ingredients, so crumbs won’t be blown o by the fan.
• Why did the display screen go black?
The unit is in standby mode. Press the power
button to turn it back on.
• Why is the unit beeping?
Either the food is done cooking, or the other zone has started cooking.
• Why is there an “E” message on the display screen?
The unit is not functioning properly. Please contact Customer Service at
AU 61 2 8801 7666, NZ 64 800 112 660
.
19AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
ONE (1) YEAR LIMITED REPLACEMENT WARRANTY
For guarantee claims, you will need to submit a proof of purchase in the form of a valid
receipt that displays date and place of purchase. This warranty does not replace but is in
addition to your statutory rights.
If your product becomes defective due to faulty material or workmanship within a period
of 1 year from the date of purchase, we warrant to do the following:
• For New Zealand Consumers: We will replace the defective/faulty part with a new
product, free of charge, or if the unit is deemed defective/faulty we replace the unit
with an equivalent or upgraded model, at our discretion.
• For Australian Consumers: Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a replacement or refund for
a major failure and for compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a major failure.
Replacement items will be covered by the limited warranty for the balance of the
warranty period
from the date of the original purchase. Please note: Your warranty is
subject to the following conditions.
• DO NOT operate the appliance with a damaged plug or cord, or if the unit has been
dropped, damaged or dropped in water.
• To avoid the risk of electric shock, do not disassemble or attempt to repair the
appliance on your own. If the supply cord is damaged, it must be replaced by a
qualified electrician to avoid a hazard. Incorrect re-assembly or repair can cause a risk
of electric shock or injury to persons when the appliance is used.
• The item has not been misused, abused, neglected, altered, modified or repaired
by anyone.
• The item has been subjected to fair wear and tear.
• The item has not been used for trade, professional or hire purposes.
• The item has not sustained damage through foreign objects, substances or accident
What is not covered?
• Accessories supplied with the item.
• Components that are subject to natural wear and tear caused by normal use in
accordance with operating instructions.
• Unauthorised/improper maintenance/handling or overload is excluded from this
warranty.
Proudly distributed by
Mann&Noble Pty Ltd
Building D, 33 Quarry Road
Erskine Park NSW, Australia, 2759
AU: 02 8801 7666
NZ: 0800 112 660
AU: ninjakitchen.com.au
NZ ninjakitchen.co.nz
Illustrations may dier from actual product. We are constantly striving to improve our products,
therefore the specifications contained herein are subject to change withoutnotice.
DUALZONE, MATCH COOK, MEGAZONE, and SMART FINISH
are trademarks of SharkNinja Operating LLC.
© 2023 SharkNinja Operating LLC
NOTE: Save these instructions. Keep for future reference.
VISIT US ONLINE AT:
ninjakitchen.com.au
ninjakitchen.co.nz
Or follow us on our social media pages:
@ninjakitchenau, @ninjakitchennz, @NinjaKitchenANZ
