Indoor - 20 LED
Clip String Light
5021-GL42589-EN_071819
CUSTOMER SERVICE
READ, FOLLOW AND SAVE THESE INSTRUCTIONS
MODEL #GL42589
BATTERY INSTALLATION (ill. 1)
Your string light requires three (3) AA alkaline 1.5V batteries (not included) to achieve maximum battery life.
Clean the battery contacts and also those of the device prior to battery installation.
1. To open battery compartment, push clip up.
2. Insert three (3) AA alkaline batteries into the compartment in the proper polarity as shown.
3. Close the battery compartment.
HOW TO OPERATE THE STRING LIGHT USING BATTERY BOX (ill. 2)
Toggle the switch for the “blinking feature” and steady on.
NOTE: Do not hang any pictures over 0.35 ounces (10 grams)
TROUBLESHOOTING
All of the lights fail to work:
• Check that the power is on.
• Change the batteries.
MAINTENANCE
• To clean, wash with a damp soft cloth.
CAUTION
• This is not a toy. For decorative use only.
• To increase the lifespan of your string light, store when not in use.
• Failure to insert batteries in the correct polarity, as indicated, may shorten the battery life or may cause them to leak.
• Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of different types.
• Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium or Nickel Metal Hydride) batteries.
• Remove batteries if exhausted or if product is to be left unused for a long period of time.
• Do not dispose of batteries in fire.
• Batteries should be recycled or disposed of as per manufacturer’s recommendations.
• Always purchase the correct size and grade of battery most suitable for the intended use. Clean the battery contacts and also those of the device prior
to battery installation. Ensure the batteries are installed correctly with regard to polarity (+and -). Remove used batteries promptly.
FOR INDOOR USE ONLY.
Button
15cm
FLASH
15cm
FLASH
