Loading ...
Loading ...
Loading ...
10
Install or remove 12V car power adapter (Fig.6)
OPERATING
1. Unravel cord before use. If the battery is installed, remove it from the
machine first by pressing battery release button and pulling out.
2. Slide the 12V Car Power Adapter into the machine until you hear a
click.
3. Connect the adapter into the car socket. When ready to use, power
car on. Always operate vehicle outdoors.
NOTE: Be sure the cord runs through the hole at the base of the pack.
Step 2: Connect the Air Chuck to the Valve Stem (Fig.7)
1. Push the air chuck clamp up so that it is in the unlock position.
2. Then place the air chuck on the valve stem and make sure the
threaded section of the valve stem is inside the air chuck.
3. Pressing air chuck clamp down until it stops or is parallel with the
air hose.
Improperly attached hoses or accessories can become detached
under pressure and cause serious injury. Possible air leaks can
cause faulty pressure readings. Make sure all connections are
tightly secured.
NOTICE:
A- Air chuck clamp in
unlocked position
B- Air chuck clamp in
locked position
C -Valve stem
D -Air chuck
E -Air hose
F -Air chuck clamp
C
D
E
F
Fig.6
Fig.7
Loading ...
Loading ...
Loading ...