Loading ...
Loading ...
Loading ...
9.4.3 Network Sengs
TCP/IP Sengs
TCP/IP sengs must be properly congured before you operate the device over
network. The device supports IPv4.
Steps
1. Click Network → Basic Sengs → TCP/IP to enter the sengs page.
Figure 9-7 TCP/IP Sengs
2. Select Network Card.
3. Congure the network parameters.
-
Check DHCP, the device will get the parameters automacally.
-
Set the IPv4 Address, IPv4 Subnet Mask and IPv4 Default Gateway manually.
4. Congure the DNS server.
5. Edit Alarm Center IP and Alarm Host Port.
6. Click Save to enable the sengs.
Port Sengs
Video Intercom Face Recognion Door Staon User Manual
65
Loading ...
Loading ...
Loading ...