Loading ...
Loading ...
Loading ...
3736
Accessories
Ventilation Requirements
03 Connectivity
SmartDevice Box 6125265
05 Top Ventilation grill
Top ventilation grill 48”x 4”
Top ventilation grill 48”x 4 ¾”
9903655
06 Door Stop
90° Door limiter for models with SoftSystem 9096414
02 Water & Ice
Water Filter 9880980
01 FreshAir activated carbon filter
Pack 1 Air filter for combinations and all refrigerator 9096989
9096989
6125265
9096414
9880980
If the appliance is integrated in a fitted kitchen, the following ventilation requirements must be met: - The spacing fins on the back of
the appliance are used to ensure sufficient ventilation. These must not lie in cavities or recesses in their final installation position. -
Basically, the larger the ventilation gap, the more energy the appliance saves during operation. We suggest a gap between the rear of
the appliance and the wall of 1 1/2 inch (38 mm) for optimal energy consumption.
Do not restrict the air flow. A cross-sectional air flow of at least 31 in2 (200cm2) per appliance at the airflow inlet (1) and at the
airflow outlet (2).
The top ventilation space can be directed in one of the following ways:
A. Directly over the appliance (2) with a gap between the ceiling of the unit and the cabinet
B. Above the cabinet and below the ceiling (3).
C. Through a vent installed in a soffit (4).
Be sure to consider the possibility of having to raise some of the leveling legs in order to level the appliance when installing. If you
adjust the height of the appliance – it will effectively reduce air flow. Therefore leave yourself some room for adjustment.
The appliance is designed to allow proper air flow when installed up against the wall.
Mounting wall spacers
These spacers are mounted on the left and right of the back of the appliance to extend the depth of
the appliance by approximately 5/8 in (15mm) and provide better energy consumption and avoid
the formation of condensate water at high levels of ambient humidity and enclosed niches. The
appliance is fully functional if the spacers are not used, but it will consume slightly more energy.
04 Side by Side Kit
Side by Side kit for models with handle 80” height
Side by Side kit for models with handle 73” height
9903 573
9903598
9900368
A
1
2
3
4
B
C
B - Side view
Cabinet
Refrigerator
9900368
Loading ...
Loading ...