Loading ...
Loading ...
Loading ...
OWON HDS1021M Handheld DSO & DMM 8-Advanced Function of Oscilloscope
8.12 System State Menu
The system state menu is used to display information about the present horizontal system, vertical
system, trigger system and others. The operation steps are shown as below.
1. Press the MENU key and the function menu is displayed at the right of the screen.
2. Press the MENU ▲ or MENU ▼ key to select the SYS STAT. Four options appear at the
bottom of the screen.
3. Sequentially press key F1 through F4 key and the corresponding state information will be
shown on the screen.
The screen that looks like the following figure 48 will be displayed.
figure 48:
System State
8.13 Setting of Time Base Mode
The time base mode menu is explained as the following table.
Function menu Setting Explanation
TimeBase Main Horizontal main time base is used to wave display.
Window Zone Use two cursors to define a window area.
Window Expand the defined window to full-screen display.
For the operation of window extension, please execute the following steps:
1. Press MENU key, display the function menu on the right side of the screen.
2. Press MENU ▲ or MENU ▼ key to select TIME BASE, display three options at the
bottom.
3. Press F2 key to select window setting.
５１
Loading ...
Loading ...
Loading ...