FLUKE 9142-A-156 User Manual for the Fluke 9142-A-156 Low Temp Field Metrology Well

Loading ...

Before You Start

Authorized Service Centers

we recommend that the clamp-on ferrites provided be used on the cables of probes attached

to the readout, especially if the product is used near sources of EM interference such as heavy

industrial equipment.

To attach a ferrite to a probe cable, make a loop in the cable near the connector and clamp the

ferrite around half of the loop as shown in the diagram. The ferrite can be easily snapped open

and moved to a new probe when needed.

clamp-on ferrite

connector

probe

Figure 1 Clamp-on ferrite installation

Emission Testing1.5.3

The instrument fullls the limit requirements for Class A equipment. The instrument was not

designed to be used in domestic establishments.

Low Voltage Directive (Safety)1.5.4

1.6

In order to comply with the European Low Voltage Directive (2006/95/EC), Hart Scientic

equipment has been designed to meet the EN 61010-1 and the EN 61010-2-010 standards.

Authorized Service Centers

Please contact one of the following Authorized Service Centers to coordinate service on your

Hart product:

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 9142-A-156 Low Temp Field Metrology Well