Loading ...
Loading ...
Loading ...
System Configuration
80
3
3.7 Event
Note this function is only applicable to GV-SNVR0412 / 0812 / 1611.
In Event settings, you can configure the GV-SNVR to trigger output alarms, start video
recording, send e-mail alerts and/or trigger buzzer upon motion detection and input trigger
events.
Figure 3-21
Type: Select the type of events you wish to configure, between Alarm In or Motion.
Alarm In: When the Type of events is selected as Alarm In, select the desired input
module from 1 ~ 4.
Motion: When the Type of events is selected as Motion, select the desired camera
channel from 1 ~ 4 / 1 ~ 8 / 1 ~ 16 respectively for GV-SNVR0412 / 0812 / 1611.
Enable: When the Type of events is selected as Alarm In, select Active to enable
the input module.
Normal State: When the Type of events is selected as Alarm In, select between
Open circuit or Closed circuit to define the module as normally open or normally
closed, respectively.
Loading ...
Loading ...
Loading ...