Loading ...
Loading ...
Loading ...
Safety
READ AND SAVE THESE INSTRUCTIONS
!
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING:
◼ Use this unit only in the manner intended by the manufacturer. If
you have questions, contact the manufacturer at the address or
telephone number listed in the warranty.
◼ Before servicing or cleaning unit, switch power off at service panel
and lock the service disconnecting means to prevent power from
being switched on accidentally. When the service disconnecting
means cannot be locked, securely fasten a prominent warning
device, such as a tag, to the service panel.
◼ Installation work and electrical wiring must be done by a qualified
person(s) in accordance with all applicable codes and standards,
including fire-rated construction.
◼ Sufficient air is needed for proper combustion and exhausting of
gases through the flue (chimney) of fuel burning equipment to
prevent back drafting. Follow the heating equipment
manufacturer’s guidelines and safety standards such as those
published by the National Fire Protection Association (NFPA) and
the American Society for Heating, Refrigeration and Air
Conditioning Engineers (ASHRAE) and the local code authorities.
◼ When cutting or drilling into wall or ceiling, do not damage
electrical wiring and other hidden utilities.
◼ Ducted fans must always be vented to the outdoors.
◼ Do not use this unit with any additional solid-state speed control
device.
◼ To reduce the risk of fire, use only metal ductwork.
◼ This unit must be grounded.
◼ As an alternative, this product may be installed with the UL-
approved cord kit designated for the product, following instructions
packed with the cord kit.
◼ When applicable local regulations comprise more restrictive
installation and/or certification requirements, the aforementioned
requirements prevail on those of this document and the installer
agrees to conform to these at his own expense.
3
Loading ...
Loading ...
Loading ...