Loading ...
Loading ...
Loading ...
4
Power Connections
Chassis
ground
point
Battery
FUSE
to REMOTE TURN-ON
terminal of head unit
Chassis
ground
point
Battery
FUSE
Connect the ground terminal to the closest point on the chassis of the vehicle.
Keep this ground wire to less than 39" (100 cm) in length. Use 8 gauge
(or heavier) wire.
Connect the remote terminal to the remote output of head unit using 16 gauge
( or heavier ) wire.
Connect an empty fuse holder within 18" (45 cm) of the car battery, and run 8 gauge
(or heavier) cable from this fuse to the amplifier location. Then connect the fuse
holder to the "BATT+" (+12V) connection on the subwoofer rear panel.
Power Connections
If you use high level inputs, AUTO TURN ON switch
in the “ON” position, the subwoofer auto turn on when
there is signal input, this connection is input signal
control subwoofer TURN-ON or TURN-OFF. If subwoofer
detected no speaker-level input,the subwoofer will TURN
-OFF . if you prefer remote turn on / turn off connection,
the switch is in the OFF position.
Power Connections
NOTE: In this connection, the
AUTO TURN ON switch is in the
OFF position.
Loading ...
Loading ...