Loading ...
Loading ...
Loading ...
-15-
TROUBLESHOOTING
Should you have any problem(s) with your vacuum cleaner, review the table
below for solutions to minor performance issues.
WARNING
Disconnect electrical supply before performing maintenance to the vacuum
cleaner. Failure to do so could result in electrical shock or personal injury.
PROBLEM POSSIBLE CAUSE SOLUTION
Vacuum will not
power on.
The plug is not plugged to the
wall outlet.
Be sure power cord plug is fully plugged
into outlet.
The vacuum is not turned on.
Press the on/off switch to turn the
vacuum on.
The vacuum body is overheated.
Unplug the power cord and let the
vacuum cool down for 50 minutes.
The vacuum is damaged. Call (866) 384-8432 for assistance.
The job of
dirt pick-up
is poor or
suction power
is weak.
Dust cup is full.
Empty dust cup. Follow instructions on
page 11.
Filters need cleaning.
Follow lter cleaning instructions on
page 12.
Filters need to be replaced.
Purchase online at www.vacmaster.com
or call (866) 384-8432.
There is a clog in the vacuum.
Check the nozzle, telescoping wand,
hose and dust cup for clogs and remove
accordingly.
Dust cup is not installed well.
Check dust cup for correct installation
and ensure it is snapped rmly in place.
Follow instructions on page 13.
The hose is not inserted into the
canister well.
Check the hose for correct installation
and ensure it is snapped rmly in place.
The hose is damaged.
Purchase online at www.vacmaster.com
or call (866) 384-8432.
The vacuum is damaged. Call (866) 384-8432 for assistance.
Loading ...