Loading ...
Loading ...
Loading ...
Paper Handling
Single sheets do not feed properly
Paper does not feed.
Cause What to do
Continuous paper is in the paper path.
Press the Load/Eject button to feed the continuous paper back to
the standby position. Set the paper release lever to the
single-sheet feeding position and insert a new sheet. See
“Switching to single sheets” on page 53 for more information.
The paper source is set to tractor feeding. Set the paper release lever to the single-sheet feeding position.
See “Setting the Paper Release Lever” on page 19.
The paper on the sheet guide is positioned too far
to the left or right far the printer to detect that it is
there.
Move the paper (and the edge guides) a little to the left or right.
The paper is not loaded properly. See “Loading Single Sheets” on page 44 for instructions on loading
single-sheet paper.
The paper-thickness lever is set incorrectly. Set the paper-thickness lever to match the thickness of your paper.
See “Adjusting the Paper Thickness Lever” on page 19.
Paper is creased, old, too thin, or too thick. See “Paper” on page 150 for information on paper specifications
and use new, clean sheets of paper.
Paper does not eject completely.
Cause What to do
The paper may be too long.
Press the LF/FF button to eject the page. Use paper that is within
the specified range. See the paper specifications in “Paper” on
page 150.
The paper does not feed properly with the optional cut-sheet feeder.
Cause What to do
The cut-sheet feeder is not installed properly. Reinstall it as described in “Installing the cut-sheet feeder” on
page 127.
Too many sheets are loaded in the cut-sheet
feeder. You cannot load more than 150 sheets of
paper in the high-capacity cut-sheet feeder.
Load less than 150 sheets of paper. See “Cut-Sheet Feeder” on
page 126 for more information.
The edge guides of the cut-sheet feeder are not
positioned correctly.
Align the left edge guide with the arrow mark, then move the right
edge guide to match your paper’s width.
There is only one sheet left in the bin. Add more paper to the cut-sheet feeder.
LQ-590II/LQ-590IIN/LQ-2090II/LQ-2090IIN User’s Guide
Troubleshooting 110
Loading ...
Loading ...
Loading ...