Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/73218894-0466-001-eol/bg7.png)
AXIS P3353
Accessing the Product
will attemp t to automatically configure the router to allow access to the product. This is e n able d f rom Setup > System Options >
Network > TCP/IP Advanced.
For m o re information, please see
NAT traversal (port mapping) for IPv4, on page 39
. See also AXIS Internet Dynam ic DNS Service at
www.axiscam.net For Technical notes on this and other topics, visit the Axis Support web at www.axis.com/techsup
Set the Root Pa ssword
To gain access to the Axis product, you must set the passwo rd for the default adm inistrator user root. This is done in the Configure
Root Password dialog , which appears when the product is accessed for the first time.
To prevent network eavesdropping, the root password can be set via an encrypted HTTPS connection, which requires an HTTPS
certificate. HTTPS (Hypertext Transfer Protocol over SSL ) is a protocol used to encrypt traffic between web browsers and servers. The
HTTPS certificate ensures encrypted exchange of information.
To set the password via a standard HTTP connection, enter it directly in the first dialog.
To set the password via an encrypted HTTPS connection, follow these steps:
1. Click Create self-signed certificate.
2. Provide the requested information and click OK.Thecertificate is created and the password can now be set securely. All
traffic to and from the product is encrypted from this point on.
3. Enter a passw ord and the n re-ente r to confirm the spelling. Click OK. The password has now been configured.
Note
• The default administrator user name root is permanent and cannot be deleted.
• If the password for root is lost, the product must be reset to the factory default settings. See
Reset to Fa ctory Default
Settings, on page 44
.
Set Power Line Frequency
Power line frequency is set the first time the Ax is product is accessed and can only be changed from Plain Config(see
page 44
)
or by
resetting the product to factory default.
S
elect the power line frequency (50 Hz or 60 Hz) used at the location of the Axis product. Selecting the wrong frequency may cause
image flickeriftheproductisusedinfluorescent light environments.
7
Loading ...
Loading ...
Loading ...