Honeywell HC35WB5R3 5MP Fixed-lens IR Bullet Camera

Honeywell 35 Series User Guide - Page 36

For HC35WB5R3.

PDF File Manual, 81 pages, Read Online | Download pdf file

HC35WB5R3 photo
Loading ...
Loading ...
Loading ...
25
Honeywell 35 Series IP Cameras User Guide
WDR (Wide Dynamic Range)
By lowering the brightness of the brightest area, and enhancing the brightness of the
darkest area, WDR balances brightness and darkness in a scene so that both the
darkest area and the lightest area can be seen clearly at the same time.
This value ranges from 1 to 100. The default value is 50.
BLC (Backlight Compensation)
The camera automatically adjusts the exposure to suit the conditions, so that the
darkest area of the video can be seen.
This value ranges from 1 to 100. The default value is 50.
HLC (Highlight Compensation)
When the HLC function is enabled, the camera can lower the brightness of the brightest
section of video, according to the selected HLC control level. HLC can reduce the
amount of halo and lower the brightness of the entire video image.
This value ranges from 1 to 100. The default value is 50.
DeFog: Check the checkbox to enable defog. The image quality is compromised in foggy
or hazy environment and defog can be used to improve image clarity.
Anti-shake: Check the checkbox to enable Anti-shake.
The system provides smooth video (Electronic Image Stabilization) after enabling anti-
shake. The quality of the images is affected by the vibration intensity of the camera.
Note:
The Anti-shake functions is only applicable for PTZ model HC35WZ2R25 and
HC35WZ5R30.
Configuring OSD
Go to Setup > Camera Setup > OSD. The OSD page is displayed,
Time: Enable it to display time information in live view image.
Video title: Enable and enter video title to display video title in live view image.
( for PTZ model only) PTZ coordinates: Enable to display PTZ coordinates when moving
PTZ.
Position: Set the OSD display+ position.
Font size: Set the font size of OSD display.
Configuring Privacy Mask
On this page, you can block out sensitive view areas to address privacy concerns. Go to
Setup > Camera Setup > Privacy Mask.
To configure privacy masks:
1. Click ADD MASK to add a new privacy mask window on the video screen.
Loading ...
Loading ...
Loading ...