Loading ...
Loading ...
Loading ...
Thermographic Cube Camera User Manual
58
– Select Create the certificate request first and continue the installation. Click Browse and
Install to import the certificate to the device.
6. Click Save.
10.13.5 Set IEEE 802.1X
You can authenticate user permission of the connected device by setting IEEE 802.1X.
Go to Configuration → Network → Advanced Settings → 802.1X, and enable the function.
Select protocol and version according to router information. User name and password of server
are required.
Note
● If you set the Protocol to EAP-TLS, select the Client Certificate and CA Certificate.
● If the function is abnormal, check if the selected certificate is abnormal in Certificate
Management.
10.13.6 Set QoS
QoS (Quality of Service) can help improve the network delay and network congestion by setting
the priority of data sending.
Note
QoS needs support from network device such as router and switch.
Steps
1. Go to Configuration → Network → Advanced Configuration → QoS.
2. Set Video/Audio DSCP, Alarm DSCP and Management DSCP.
Note
Network can identify the priority of data transmission. The bigger the DSCP value is, the higher
the priority is. You need to set the same value in router while configuration.
3. Click Save.
10.14 User and Account
10.14.1 Set User Account and Permission
The administrator can add, modify, or delete other accounts, and grant different permission to
Loading ...
Loading ...
Loading ...