Loading ...
Loading ...
Loading ...
Ceiling mounting with junction box and inclined
ceiling mount are similar. Following steps take
junction box as an example.
Steps:
1. Paste the drill template for junction box to the place
where you want to install the camera.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
Figure 2-43 Drill Template
3. (Optional) Drill the cable hole, when the cables are
routed through the wall.
4. Take apart the junction box.
5. Install the gang box to the junction box cover with
three PM4 screws.
Figure 2-44 Install Gang Box to Junction Box Cover
6. Fit the camera onto the gang box.
Figure 2-45 Fit the Camera
7. Turn the camera clockwise until it snaps into the
gang box.
Figure 2-46 Snap the Camera into the Gang Box
8. Secure the junction box body on the ceiling with
four PA4 × 25 screws.
Loading ...
Loading ...
Loading ...