Loading ...
Loading ...
Loading ...
15
BASIC OPERATION
DISPLAY PANEL OF FREEZER
1. Plug in and turn on the power switch located on the control box. The Display
panel will be lighted and make a beep sound. The compressor will begin to run.
2. The default temperature setting is No. “4”.
3. The compressor is automatically cycled by the electronic controller (PCB, RD-Sensor).
4. The Defrost cycle is automatically controlled by the F-sensor, and the PCB.
5. Set level toward “1” for higher temperature and toward “7” for lower temperature.
6. The interior light is activated by the switch at the bottom of the grille when
the door is opened.
7. Evaporator fan motor(s) will run after all doors are completely closed.
8. Good Air Flow in freezer unit is critical.
Be careful to load product so that it neither presses against the back wall, nor reaches
within four inches from the evaporator compartment.
TEMP. SETTINGTEMP. CONTROL BUTTON
INNER TEMP.
(SEE PAGE16)
(SEE PAGE16)
TEMPERATURE
TURBO
FREEZE
POWER
TEMPERATURE
FREEZERS
M3F19-1-N
M3F24-1-N M3F24-2-N
M3F47-2-N M3F47-4-N
M3F72-3-N M3F72-6-N
Loading ...
Loading ...
Loading ...