Loading ...
Loading ...
Loading ...
ninjakitchen.com
ninjakitchen.com
USING THE POWER FOOD PROCESSOR BOWL
BLADE ASSEMBLIES
USING THE REVERSIBLE SLICING/SHREDDING DISC
1 Plug in motor base and place on a clean, dry, level surface such as a
countertop or table.
2 Lower the Power Food Processor Bowl onto the motor base and rotate
clockwise until it clicks into place.
3 To install the blade assembly, exercise care and grasp the Chopping
Blade Assembly by the top of the shaft and place it onto the drive gear
inside the bowl. Note that the Chopping Blade Assembly will fit loosely
onto the drive gear.
4 Add ingredients to the bowl, making sure not to exceed the MAX FILL line.
1 Plug in motor base and place on a clean, dry, level surface
such as a countertop or table.
2 Lower the Power Food Processor Bowl onto the motor base
and rotate clockwise until it clicks into place.
3 To install the Reversible Slicing/Shredding Disc, place the
disc spindle onto the drive gear inside the bowl. Then, use
the finger holes to grasp the Reversible Slicing/Shredding
Disc and place it over the spindle, with the side you would
like to use facing up.
4 Place the feed chute lid on the bowl and turn clockwise until you hear
a click, indicating the lid is locked in place. Once the lid is locked in
place, press the Power button to turn unit on. The BlendSense™
program will illuminate.
5a If using a Processing Mode program, select MODE, then use the dial
to select DISC.
5b If using a Manual program, select MANUAL, then use the dial to select
your desired speed (LOW recommended).
7 To remove the lid, press the button on the feed
chute lid near the handle to unlock, then turn the
lid counterclockwise. Lift the lid from the bowl.
8 Using the finger holes, carefully lift the disc out of
the bowl. Then, grasp the spindle by the top of the
shaft and lift it out of the bowl.
5 Place the feed chute lid on the bowl and turn clockwise
until you hear a click, indicating the lid is locked in place.
Once the lid is locked in place, press the Power button to
turn unit on. The BlendSense™ program will illuminate.
IMPORTANT:
• Review all warnings at the beginning of this Owner’s Guide before proceeding.
•
As a safety feature, if the processor bowl and lid are not properly installed, the timer will display
INSTALL and the motor will be disabled. If this happens, repeat step 5 on this page.
6a If using the BlendSense program, simply press the dial. The program will automatically
stop once complete. To stop the unit at any time, press the dial again.
6b If using a Processing Mode program, select MODE, then use the dial to select your
desired program. To start, press the dial. The program will automatically stop once
complete. To stop the unit at any time, press the dial again.
6c If using a Manual program, select MANUAL, then use the dial to select your desired speed
(LOW, MEDIUM, or HIGH). To start, press the dial. Once the ingredients have reached your desired
consistency, press the dial again or wait 60 seconds for the unit to come to a complete stop on its own.
9 To remove the bowl from the motor base, turn the bowl
counterclockwise and then lift up.
10 Turn the unit o by pressing the Power button. Unplug
the unit when finished. Refer to the Care & Maintenance
section for cleaning and storage instructions.
NOTE: When using the Chopping Blade Assembly, it is recommended to use MINCE, SMALL CHOP, or
LARGE CHOP. Processing Mode programs are not recommended when using the Dough Blade Assembly.
NOTE: It is not recommended to use the BlendSense program with the
Reversible Slicing/Shredding Disc.
NOTE: When using the Dough Blade Assembly, only use LOW speed.
7 When finished, press the button on the lid near the handle to unlock, then turn
counterclockwise and lift up from the bowl. Always remove the Chopping Blade
Assembly before emptying the ingredients from the bowl. To remove the Chopping
Blade Assembly, carefully grasp it by the top of the shaft and lift it out of the bowl.
8 To remove the bowl from the motor base, turn the bowl counterclockwise and then
lift up.
9 Turn the unit o by pressing the Power button. Unplug the unit when finished.
Refer to the Care & Maintenance section for cleaning and storage instructions.
NOTES:
• The Slicing/Shredding Disc is reversible. Use the side labeled “Slicer” for slicing. Carefully flip the
disc over to the side labeled “Shredder” for shredding.
• The feed chute lid features a pusher to guide food through the chute.
6 Press the dial to begin the program. Add the prepped ingredients you want to slice or shred
through the feed chute on the lid. Use the pusher to help guide the ingredients through the feed
chute. The program will automatically stop spinning once completed. To stop the unit at any time,
press the dial again.
NOTE:
• DO NOT process or grind dry ingredients.
• DO NOT add ingredients before completing installation of the blade assembly.
• Follow the same instructions to install the Dough Blade Assembly as the Chopping Blade Assembly.
WARNING: Chopping Blade Assembly is loose, sharp, and NOT locked in place. Before removing
blended ingredients from the bowl, carefully remove the blade assembly first, holding it by the shaft.
Failure to do so will result in a risk of laceration.
Loading ...
Loading ...
Loading ...