Loading ...
Loading ...
Loading ...
System 9 Installation and Operation
4
Transmitter Setup Controls and Functions
Battery Selection and Installation
Two alkaline AA batteries are recommended. When inserting the battery,
observe correct polarity as marked inside the battery compartment.
Figure C — Handheld Transmitter
Handheld Transmitter Battery Installation
1. While holding the upper part of the transmitter body just below the
ball-screen, unscrew the lower body cover and slide it off to expose
the battery compartment (Fig. C).
2. Carefully insert two fresh AA alkaline batteries, observing
polarity markings.
3. Screw the body back together. Do not overtighten.
Handheld Transmitter Battery Condition Indicator
After the batteries are installed, press and hold the Power/Mute switch
on the bottom of the handheld transmitter until the indicator LED turns
green. If the indicator LED does not light up when the Power/Mute
switch is pressed, the batteries are installed incorrectly or they are
Handheld Transmitter Channel Selection
Before turning on the transmitter, use DIP Switches 1 and 2, located
inside the Handheld Transmitter, to select the desired channel.
1. To access the DIP Switches, hold the upper part of the transmitter
body just below the ball-screen, and unscrew the lower body cover
and slide it off.
2. To achieve the desired channel, use the provided screwdriver to
Channel 1: Switches 1 and 2 “up”
Channel 2: Switch 1 “up”; Switch 2 “down”
Channel 3: Switch 1 “down”; Switch 2 “up”
Channel 4: Switches 1 and 2 “down”
3. Screw the body back together. Do not overtighten.
LR6,AA LR6,AA
LEVEL
CHANNEL
L H
1
ON
2
1
ON
2
CHAN NEL 1 CHAN NEL 2 CHAN NEL 3 CHAN NEL 4
1
ON
2 1
ON
2 1
ON
2
Switch Conf iguration for Channel Sel ection
Gain Trimmer
Channel Selection
DIP Switches
Channel
Label
Screwdriver
Indicator LED
(Power/Mute/Battery)
Power/Mute Switch
Battery
Compartment
Handheld Transmitter Mute Function
With the transmitter on, a slight touch of the power switch will toggle
between muted and unmuted operation. Red indicator LED shows
muted operation. Green indicator LED shows unmuted operation.
1
ON
2
CHANNEL 1 CHANNEL 2 CHANNEL 3 CHANNEL 4
1
ON
2 1
ON
2 1
ON
2
Switch Conf iguration for Channel Selection
Loading ...
Loading ...
Loading ...