Loading ...
Loading ...
Loading ...
English _19
! PTZ CAMERA (QNP-6320H/QNP-6250H)
Getting ready for network cable installation
1. Remove the cable bushing.
2. Pull off the extruded part of the removed cable bushing.
3. Use the cap installer to route the network cable through the cable bushing.
M
`
If the cable bushing is torn, use the extra cable bushing provided.
4. For waterproof protection, pull down the cable below the cable bushing as shown in the figure below.
9~10 cm
Installing using wall & pole mount
J
`
Connect the power only after installation is complete. Supplying power while the installation is in progress may cause fire or
damage the product.
1. Hang the safety wire of the wall & pole mount on the safety wire hook of the product.
Safety wire hook
Safety wire
Loading ...
Loading ...
Loading ...