Loading ...
Loading ...
Loading ...
36
INSTALLATION
Check the appliance is electrically safe when you have nished.
Fitting the handrail
1. Using the 2 mm Allen key supplied, loosen the two
retaining screws in the base and side of the handrail
support. Fit the handrail support onto the locating
bosses on the fascia (Fig. 12.1).
NOTE: The handle support should face upwards.
2. Push the support back against the fascia and tighten the
tworetaining screws. Repeat for the other side. Check
that each support is secure.
3. Locate the handrail onto the support tabs and, using
the 3 mm Allen key supplied, tighten the one retaining
screw in the bottom to secure repeat for the other side
(Fig. 12.2).
Cooktop check
Refer to “Range Overview” and check operation of each
cooking zone in turn. Be sure to use pans of the correct size
and material.
Broiler check
Refer to “Range Overview” and check operation of the broiler
and that it heats up*.
Oven check
Refer to “Range Overview” and check the operation of the
oven*. Check that the oven fans operate and the oven heats
up.
*The cooling fan, located under the induction unit blows air
out of the front of the appliance and should operate with this
function.
Customer care
Installer: Please complete your details in this guide, inform
the user how to operate the range and hand over the
instructions.
12. Final tting and checks
Retaining screw
Retaining screw
Retaining
screw
Fig. 12.1
Fig. 12.2
Loading ...
Loading ...
Loading ...