Loading ...
Loading ...
Loading ...
8
Composition of the Air conditioner
Indoor unit
NOTE: The figures are based on the external views of the standard model.
Consequently,the shape may differ for the air conditioner model you have selected.
Description:
1. Air inlet
2. Electric box
3. Refrigerant pipe (Liquid)
4. Refrigerant pipe (Gas)
5. Drain Pipe (Connect with pump)
6. Drain Pipe
7. Air Outlet
Before Operation
Special Remarks
3-minute protection after the compressor stops•
To protect compressor, the system implements 3 minutes once operation is stopped.
5 minute-protection•
Compressor must run for at least 5 minutes once operation starts. During the 5 minutes, compressor will not
stop even after set point is reached. The system will shut off if manually turned off using the remote controller.
Cooling operation •
The fan of the indoor unit will never stop running in cooling operation. It continues to operate even if the
compressor stops working.
• Heating operation
Heating capacity depends on external factors like outdoor unit temperature. Heating capacity might decrease
if outdoor ambient temperature is too low.
• Anti-freezing function during cooling
When the air temperature from the indoor outlet is too low, the unit will run for some time under the fan mode,
to avoid frost or ice forming on the indoor heat exchanger.
Cold air prevention•
Within several minutes after the heating mode is selected, the fan of the indoor unit will not run until the heat
exchanger of the indoor unit reaches a certain temperature to prevent cold draft.
• Defrosting
When the outdoor temperature is too low, ice may form on the outdoor heat exchanger, reducing heating
performance. When this happens, the defrost cycle of the system will start. During the defrost cycle, the indoor
unit fan stops (or runs at a very low speed in some cases), to prevent cold draft.
Once the defrost cycle is complete, heating operation and the fan speed resume.
1
7
2
3
4
5
6
You can control the air conditioner with the wired remote controller or wireless remote controller.
It is used for controlling power ON/OFF,setting the running mode, temperature, fan speed and other functions.
There are different types of remote controllers that can be used.
Operation instructions will be further specified in remote controller's manual.
Please read it carefully before using this appliance and keep it for future reference.
Remote Controller(Optional)
Loading ...
Loading ...
Loading ...