Loading ...
Loading ...
Loading ...
28
WARNING:
• The appliance must be dry before restarting oper-
ation.
CAUTION:
• Do not use a wire brush or other sharp, abrasive
items.
• Do not use any acidic or abrasive cleaners.
Maintenance of the hood
• To clean the surface of the housing, use a mild
detergent and a soft cloth to prevent scratching.
• The appliance can be used again after everything
has dried properly.
• If you use your cooker hood in recirculation mode,
you must replace the activated carbon filter regu-
larly (see “Replacing the activated carbon filter”).
Cleaning the aluminum grease filter
WARNUNG: Risk of fire!
Grease residue in aluminum grease filter may ignite
at intense heat. Therefore, clean the grease filter
regularly!
We recommend cleaning the grease filter monthly:
• Remove the aluminum grease filter by sliding
back the lock in the handle recess, push the filter
down gently and pull out towards the front.
• Rinse the grease filter in a solution of hot water
and neutral detergent. Soak the filter in it.
• Then clean with a soft brush, rinse thoroughly with
hot water and allow drying.
• Alternatively, the grease filter can also be cleaned
in the dishwasher (up to 60°C). Slight discolora-
tion may occur. This does not affect the function
of the grease filter.
Replacing the activated carbon filter
The activated carbon filter prevent odors and must
depend on the use, but be changed at least every six
months.
• See “Installing the activated carbon filter for recir-
culation mode” .
• Remove the old carbon filter by turning the filter
anti- clockwise.
Replacing the bulb
WARNING:
Allow the lamps to cool down before replacing the
bulbs. Risk of burns!
Lamp specfication: LED, 2 x1.5W
• Carefully remove the lamp with a suitable tool.
• Pull out the lamp and disconnect the lamp from
the connecting cable.
• Change the lamp.
• Reconnect the cable with the lamp.
• Replace the lamp properly.
Loading ...
Loading ...
Loading ...