Loading ...
Loading ...
Loading ...
2
INSTALLATION
Prepare Radio
1. Before you begin, disconnect the battery negative terminal.
2. Remove the transport screws.
3. Remove chassis from the mounting sleeve.
If you want to remove the chassis from the mounting sleeve, remove the plastic trim out
from both sides. Next, insert the two bracket keys into the left and right side of the chassis, as
illustrated, to separate the chassis from the housing.
BRACKET KEY
BRACKET KEY
PLASTIC TRIM OUT
Mount Radio
Refer to the “Installation Diagram” to install the unit.
1. Bend the tabs on the mounting sleeve, where necessary, to ensure than the front part of
the main unit will remain
into the vehicle dash opening.
2. Insert radio into the mounting sleeve.
3. Use a metal strap to secure the rear part of the chassis using the hardware indicated.
4. Make wiring connections, as illustrated in the “Wiring Diagram.”
5. Install the plastic trim out.
Loading ...
Loading ...
Loading ...