Sealey CP20VOP SV20 Series 20V 125mm Cordless Orbital User Manual

Ø125MM CORDLESS ORBITAL POLISHER 20V

- BODY ONLY

MODEL NO: CP20VOP

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

1.1. GENERAL POWER TOOL SAFETY WARNINGS

 WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock,

 reand/orseriousinjury.

 WARNING! Ensure that Health & Safety, local authority and general workshop practice regulations are adhered to when using this

polisher.

9 Save all warnings and instructions for future reference.

1.2. WORK AREA SAFETY

9 Keep work area clean and well lit. Cluttered or dark areas invite accidents.

8 DO NOT operate power tools in explosive atmospheres, such as in the presence of ammableliquids,gasesordust.Powertools

create sparks which may ignite the dust or fumes.

9  Keepchildrenandbystandersawaywhileoperatingapowertool.Distractionscancause you to lose control.

1.3. PERSONAL SAFETY

9 Stay alert, watch what you are doing and use common sense when operating a power tool. DO NOT use a power tool while you are

 tiredorundertheinuenceofdrugs,alcoholormedication.Amomentofinattentionwhileoperatingpowertoolsmayresultinserious

 personalinjury.

9  Usepersonalprotectiveequipment.Alwaysweareyeprotection.Protectiveequipmentsuchasdustmask,non-skidsafetyshoes,

 hardhat,orhearingprotectionusedforappropriateconditionswillreducepersonalinjuries.

9  Preventunintentionalstarting.Ensuretheswitchisintheo󰀨-positionbeforeconnectingtopowersourceand/orbatterypack,picking

up or carrying the tool.

9  Carryingpowertoolswithyourngerontheswitchorenergisingpowertoolsthathavetheswitchoninvitesaccidents.

9  Removeanyadjustingkeyorwrenchbeforeturningthepowertoolon.

8 DO NOToverreach.Keepproperfootingandbalanceatalltimes.Thisenablesbettercontrol of the power tool in unexpected

situations.

9 Dress properly. DO NOT wearlooseclothingorjewellery.Keepyourhair,clothingand gloves away from moving parts. Loose clothes,

 jewelleryorlonghaircanbecaughtinmovingparts.

9 If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.

1.4. POWER TOOL USE AND CARE

8 DO NOT forcethepowertool.Usethecorrectpowertoolforyourapplication.Thecorrectpowertoolwilldothejobbetterandsafer

at the rate for which it was designed.

8 DO NOTusethepowertooliftheswitchdoesnotturnitonando󰀨.Anypowertoolthatcannotbecontrolledwiththeswitchis 

 dangerousandmustberepaired.

 WARNING!Disconnecttheplugfromthebatterypackfromthepowertoolbeforemakinganyadjustments,changingaccessories,or

storing power tools.

9 Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to

 operatethepowertool.Powertoolsaredangerousinthehandsofuntrainedusers.

9  Maintainpowertools.Checkformisalignmentorbindingofmovingparts,breakageofpartsandanyotherconditionthatmaya󰀨ect

 thepowertool’soperation.Ifdamaged,havethepowertoolrepairedbeforeuse.Manyaccidentsarecausedbypoorlymaintained

power tools.

9  Usethepowertool,accessoriesandtoolbitsetc.inaccordancewiththeseinstructions,takingintoaccounttheworkingconditions

 andtheworktobeperformed.Useofthepowertoolforoperationsdi󰀨erentfromthoseintendedcouldresultinahazardous 

situation.

1.5. SERVICE

9  Haveyourpowertoolservicedbyaqualiedrepairpersonusingonlyidenticalreplacementparts.Thiswillensurethatthesafetyof

the power tool is maintained.Unauthorisedpartsmaybedangerousandwillinvalidatethewarranty.

1.6. SPECIFIC POLISHER SAFETY

9 WARNING!Disconnectthebatteryandensurethatthepadisatacompletestandstillbeforechangingaccessories,servicingor 

performing any maintenance.

 WARNING! Keep all guards and holding screws in place, tight and in good working order.

9  Checkregularlyfordamagedparts.Aguardoranyotherpartthatisdamagedmustberepaired/replacedbeforethepolisherisnext

used.

9  Keepthepolishercleanforbestandsafestperformance.

CP20VOPIssue2(1,3)25/06/21

Original Language Version

Refer to

instructions

Wear eye

protection

Wear protective

gloves

Wear ear

protection

Wear protective

clothing

Wear a mask

9 Before each use check all attachments for condition. If worn or damaged replace immediately.

8 DO NOTswitchthepolisheronuntiltheheadisincontactwiththepanelandswitchtheunito󰀨beforeremovingtheheadfromthe

panel.

8 DO NOTusethepolisherwithabrasivecleanersorrubbingcompoundsasexcessivepaintremovalmayresult.

8 DO NOT get the polisher wet or use in damp or wet locations or areas where there is condensation.

8 DO NOT allow untrained persons to operate the polisher.

9 When not in use, unplug from the mains power supply and store in a safe, dry, childproof area.

2. INTRODUCTION

Digitaldisplayandvariablespeedcontrolfrom2100-5000rpm.15mmOrbitforgreaterpolishinge󰀩ciency.Featuresaslide-buttonon/o󰀨

switchallowingforasmoothcomfortablemainhandlegrip.Spindlelockforfastandeasypadchanges.Doubleinjectioncompositehousing

withrubbergripforaddedcomfort.Requirescompatible20Vbatteryandmainscharger,soldseparately.SuppliedwithØ125mmbackingpad.

3. SPECIFICATION

Model No:..............................................................CP20VOP

Battery ...................20V2Ah-6AhLithium-ion(notincluded)

Consumableparts:

CP20VBP2-2AhBattery,CP20VBP4-4AhBattery,

CP20VBP6-6AhBattery

Free speed ......................................................2100-5000rpm

Noisepower/pressure .......................................... 86/75dB(A)

Padsize .................................................................. Ø125mm

Replacement parts: ................................................................

CP20VMC-MainsCharger(notincluded)

Vibration/uncertainty .......................................... 4.56/1.5m/s²

4. OPERATION

 WARNING! DO NOT immerse the polisher in water.

 WARNING!Ensurethatyouread,understandandapplythesafetyinstructionsinSection1.

 WARNING!Excesspressurecancausedamagetopaintworkandwillputthepolishermotorunderstrain.Polisherswithburntout

 motorswillberejectedasawarrantyclaim.Normallytheweightofthepolisherissu󰀩cient.

 WARNING!Ensureyouread,understandandapplythesafetyinstructionsinSection1.

4.1.  EnsurethepowercontrolswitchisNOTswitchedtotheonpositionbeforettingthebattery.

4.2.  Holdthepolisherrmlywithonehandonthegripandkeeptheotherhandontheendhandle.

4.3.  Toselecttherequiredspeedpressthepositivespeedselectorswitchtotheappropriatespeed.

4.4.  ContactyourSealeystockistfordetailsofcompoundheadsandpolishingmopbonnets.

4.5. BACKING PAD EXCHANGE (FIG.2)

 WARNING: Removebatterybeforetting/removingpadsormaintenanceiscarriedout.

4.5.1. Firstdetachtheremovablehandlebyremovingthetwoplasticscrewsoneithersideofthehandle.

4.5.2. Toremovethebackingpad,pressdownchucklockingbuttonundertheremovablehandleandmanuallyunscrewthepadclockwise

 (whenviewedfromabove).

5. MAINTENANCE

 WARNING!Beforeattemptinganymaintenanceensurethebatteryisremovedfromtheunit.

5.1. Keep the machine clean and dry. DO NOTuseabrasivestocleantheunit.Ensureallexternalheadscrewsaretight.

5.2.  Cleanregularlybyblowingajetofcompressedairthroughsideventstoensuremotorventilationiskeptclear.

 WARNING! Wear approved safety eye protection and, if necessary, respiratory protection.

NOTE: MaintenancemustonlybecarriedoutbyatechnicallyqualiedpersonoranauthorisedSealeyserviceagent.

Original Language Version

g.1

g.2

CP20VOPIssue2(1,3)25/06/21

 WARNING! – Risk of Hand Arm Vibration Injury.

 ThistoolmaycauseHandArmVibrationSyndromeifitsuseisnotmanagedadequately.

 ThistoolissubjecttothevibrationtestingsectionoftheMachineryDirective2006/42/EC.

 Thistoolistobeoperatedinaccordancewiththeseinstructions.

 Measuredvibrationemissionvalue(a)............................4.56m/s²

 Uncertaintyvalue(k):......................................................1.5m/s²

 Pleasenotethattheapplicationofthetooltoasolespecialisttaskmayproduceadi󰀨erentaveragevibrationemission.We 

 recommendthataspecicevaluationofthevibrationemissionisconductedpriortocommencingwithaspecialisttask.

 Ahealthandsafetyassessmentbytheuser(oremployer)willneedtobecarriedouttodeterminethesuitabledurationofuseforeach

tool.

 NB:StatedVibrationEmissionvaluesaretype-testvaluesandareintendedtobetypical.

 Whilstinuse,theactualvaluewillvaryconsiderablyfromanddependonmanyfactors.

 Suchfactorsinclude;theoperator,thetaskandtheinsertedtoolorconsumable.

 NB:ensurethatthelengthofleaderhosesissu󰀩cienttoallowunrestricteduse,asthisalsohelpstoreducevibration.

 Thestateofmaintenanceofthetoolitselfisalsoanimportantfactor,apoorlymaintainedtoolwillalsoincreasetheriskofHandArm

 VibrationSyndrome.

Health surveillance.

 Werecommendaprogrammeofhealthsurveillancetodetectearlysymptomsofvibrationinjurysothatmanagementprocedurescan

 bemodiedaccordingly.

 Personalprotectiveequipment.

 Wearenotawareofanypersonalprotectiveequipment(PPE)thatprovidesprotectionagainstvibrationinjurythatmayresultfromthe

 uncontrolleduseofthistool.Werecommendasu󰀩cientsupplyofclothing(includinggloves)toenabletheoperatortoremainwarm

 anddryandmaintaingoodbloodcirculationinngersetc.Pleasenotethatthemoste󰀨ectiveprotectionisprevention,pleasereferto

 theCorrectUseandMaintenancesectionintheseinstructions.Guidancerelatingtothemanagementofhandarmvibrationcanbe

 foundontheHSCwebsitewww.hse.gov.uk-Hand-ArmVibrationatWork.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycleunwantedmaterialsinsteadofdisposingofthemaswaste.Alltools,accessoriesandpackagingshouldbesorted,takento

arecyclingcentreanddisposedofinamannerwhichiscompatiblewiththeenvironment.Whentheproductbecomescompletely

unserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersanddisposeoftheproductandfluids

according to local regulations.

WEEE REGULATIONS

DisposeofthisproductattheendofitsworkinglifeincompliancewiththeEUDirectiveonWasteElectricalandElectronicEquipment

(WEEE).Whentheproductisnolongerrequired,itmustbedisposedofinanenvironmentallyprotectiveway.Contactyourlocalsolid

waste authority for recycling information.

BATTERY REMOVAL

UndertheWasteBatteriesandAccumulatorsRegulations2009,JackSealeyLtdarerequiredtoinformpotentialpurchasersofproducts

containingbatteries(asdefinedwithintheseregulations),thattheyareregisteredwithValpak’sregisteredcompliancescheme.Jack

SealeyLtdBatteriesProducerRegistrationNumber(BPRN)isBPRN00705.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior

notice.

Important:NoLiabilityisacceptedforincorrectuseofthisproduct.

Warranty:Guaranteeis36monthsfrompurchasedate,proofofwhichisrequiredforanyclaim.

Original Language Version

CP20VOPIssue2(1,3)25/06/21

Sealey CP20VOP SV20 Series 20V 125mm Cordless Orbital Polisher

Product's Documents

User Manual

Specifications

Sealey CP20VOP Questions and Answers