Loading ...
Loading ...
Loading ...
en Installation instructions
44
6.
Centre the appliance.
There must be an air gap of at least 4mm between
the appliance and adjacent unit fronts.
7.
Attach the four fastening elements. →Page45
Attach the red fastening elements at the top.
Attach the green fastening elements at the bottom.
8.
Screw the appliance into place.
9.
Insert the left- and right-hand intermediate strips into
the notches provided for this purpose and slide
them downwards.
10.
Insert the left- and right-hand panels until a clicking
sound is heard.
a The panels are engaged.
11.
Check whether the left- and right-hand panels are
vertically aligned.
12.
If necessary, align the panels. →Page45
13.
If required, you can adjust the height of the appli-
ance door using the adjustment screws on the left
and right. To do this, push the intermediate strips
upwards.
Note:The gap between the worktop and the appliance
must not be sealed by additional strips.
Thermal insulation strips must not be fitted to the side
panels of the surround unit.
29.11 For handleless kitchens with vertical
bar handle strips:
1.
Attach a suitable filling piece in order to cover any
sharp edges and to guarantee a safe installation.
2.
Pre-drill aluminium profiles to establish a screw con-
nection.
Loading ...
Loading ...
Loading ...