Loading ...
Loading ...
Loading ...
9
1. On/O Switch: The On/O (or Power) Switch is on the right-hand side of
the machine base. The On/O Switch controls the power to the machine.
BEFORE moving the On/O Switch to the On
(I)
position, make sure the
Start/Stop Switch is in the Stop ( ) position and the Variable Speed Dial
is to the far left, pointed at number 1. Move the On/O Switch to the O
position whenever the machine will be left unattended.
2. On/O Indication: When the Pulse ( ) and Start ( ) symbols are lit, they
indicate that the machine is plugged in, the On/O Switch is powered On,
and power is flowing.
3. Start/Stop Switch
:
Before starting, always make sure that the Variable Speed
Dial is to the far left, pointed at number 1. Lifting the Start/Stop Switch to the
Start ( ) position will start the machine and initiate the lending process.
4. Variable Speed Dial:
The Variable Speed Dial selects blade rotation speeds
from 1 to 10 (low to high). Always begin the blending process with the
Variable Speed Dial set to 1. Make sure that the On/O Switch is in the On
(I) position. Move the Start/Stop Switch to the Start ( ) position. Rotate the
Variable Speed Dial to the desired speed setting. To stop the machine, rotate
the Variable Speed Dial back to 1 and move the Start/Stop Switch back to
Stop ( ) position. If the Variable Speed function is not working and the
blades only rotate at the lowest speed (Variable Speed 1) the blender must
be reset. Refer to Troubleshooting on Page 17.
5.
Pulse Switch: Pressing down on the Pulse Switch
(
)will cause the machine
to blend at the speed setting shown on Variable Speed Dial for as long as
the Pulse Switch is held down.
1
5
4
3
2
CONTROL PANEL
Loading ...
Loading ...
Loading ...