Loading ...
Loading ...
Loading ...
3130
ENEN
IMPORTANT: The following instruction for installation apply to all Fulgor Milano models.
6.1 Built-in installation of
single appliance
For a built-in installation, to cover gaps between
the appliance and the adjacent cabinets and affix
the appliance to the cabinetry, use the supplied
10 x piece bracket kit. Follow the instructions
included in the bag with the brackets for
placement of brackets on the appliance.
Operate as follows:
> Push the appliance into the installation cutout [ 1 ].
> Always mount front panel on door before
pushing the unit into its final position inside the
cutout or structure.
> Check the levelling of the appliance, adjusting
its feet and wheels to correct it.
> Secure the appliance to the adjacent cabinets
using the 10 x spacer brackets. [ 2 ].
Door must be open to access the brackets. Screws
for fixing the brackets to adjacent cabinetry are
not included.
> Mount the bracket covers: first insert them
laterally and then push firmly until a “click” is
heard
[ 3 ].
Side profiles mounting:
(Bird’s eye view)
A Plastic connecting brackets
B Profile trim cover
6.2 Built-in installation of two or more
appliances
> The central profile is provide with freezer and
wine cellar columns.
Plastic covering frames are provided for
closing gaps between the appliance and the
adjacent cabinets.
Operate as follows:
> Position the appliances in front of the installation
area, leaving enugh space to operate at their back
[ 1 ].
6. INSTALLATION: BOTTOM COMPRESSOR MODELS
5.10 Optional 1/8’’ panel reveal for multiple unit installation
Note: when joinig multiple using overlay panels as per the instructions herein for single install, the
resulting gap/reveal will be 3/16” between panels. If you would like to maintain ~1/8” reveal between
all the panel and gables you can add 1/16” to the width dimension of the specified panel for each unit.
For example: joining a 24”+30”+36” unit:
Opening width: 24”+30”+36”=90”
Standard panel widths based on single unit installs: 23-3/4”+29-3/4”+35-3/4”=89-1/4”
This leaves an overall space of 3/4” divided by 4 gaps= 3/16”
If you add 1/16” to each panel: 23-13/16”+29-13/16”+35-13/16”=89-7/16”
This would result in an overall space of 9/16” divided by 4 gaps = 9/64” (~1/8”) betweeen panels
5. PANELS MOUNTING
Appliance
Wall or furniture
A
B
B
Click!
Click!
3
1
2
Loading ...
Loading ...
Loading ...