Pyle PAD20MXU Compact Dj Mixer Pro Audio Interface

PAD20MXU - Manuals - Page 5

For PAD20MXU.

PDF File Manual, 5 pages, Read Online | Download pdf file

PAD20MXU photo
Loading ...
Loading ...
Loading ...
Note: When recording via the USB port, please pay attention to the risk of feed-
back if you assign the recording signal of the computer to channel CH 2/3 as an
Input signal.
6. For channel CH 2/3, adjust the sound with the controls HI and LO (20) and the
balance with the control BAL (22).
7. Use the controls LEVEL (17,21) to mix the input signals of channels CH 1 and
CH 2/3 or to fade them IN and OUT. When a channel is not used, sat its
control to "0".
8. Use the control MASTER (14) to set the level of the output signal that is sent via
the jacks MAIN OUT (7), TAPE OUT (4) and the USB port (5).
If one of the overload LEOs CLIP (13) shows red, turn back the control MASTER
accordingly.
9. The headphone output MONITOR/PHONES (9) allows to monitor the output
signal of the mixer. For this purpose, the button TAPE IN ASSIGN TO MONITOR
(12) must not be engaged. Adjust the headphone volume with the control
MONITOR/PHONES (10).
WARNlNG! Never adjust the headphones to a very high volume. Permanent high
volumes may damage your hearing! Your ear will get accustomed to high
volumes which do not seem to be that high after some time. Therefore, do not
further increase a high volume after getting used to it.
10. When a unit is connected to the jacks TAPE IN (3), it is possible to monitor
the output signal of this unit:
1. If the button TAPE IN ASSIGN TO MAIN (11) is engaged: via the outputs
MAlN OUT (7), TAPE OUT (4), USB (5) and MONITOR/PHONES (9)
The output signaI of the mixer is also present at these jacks. Therefore, set
the two controls LEVEL (17,21) to "0", if necessary.
2. lf the button TAPE IN ASSIGN TO MONITOR (12) is engaged: only via the
headphone output MONITOR/PHONES. In this case, it is not possible to
monitor the output signal of the Mixer via the headphone output.
8 9
PAD20MXU
5-Channel Professional Compact Audio DJ Mixer With USB Interface
Features:
Ultra-Low Noise Design With High Headroom
Integrated USB Audio Interface - Record Music On Your Computer
Smooth Rotary-Style Faders For Mic/USB/Line/Master Controls
Extremely Musical 2-Band EQ & Pan On Each Channel
Clipping LED Indicators For Left And Right Channel
1 XLR / 1/4'' Jack Combo Mic Input
2 RCA Stereo Inputs
2 1/8'' (3.5mm) Stereo Output and Monitor Jacks
Integrated Rechargeable Lithium Ion Battery, 500mAh 3.7V
18V Phantom Power
www.PyleUSA.com www.PyleUSA.com