Loading ...
Loading ...
Loading ...
You can input 0, 2, 3, 4, 5, or 6 which indicated dierent adding modes. 0 indicates that the
device is added by IP address or domain name; 2 indicates that the device is added via IP
server; 3 indicates that the device is added via HiDDNS; 4 indicates that the device is added via
EHome protocol; 5 indicates that the device is added by serial port; 6 indicates that the device
is added via Hik-Connect.
Address
Edit the address of the device. If you set 0 as the adding mode, you should input the IP address
or domain name of the device; if you set 2 as the adding mode, you should input the IP
address of the PC that installs the IP Server; if you set 3 as the adding mode, you should input
www.hik-online.com.
Port
Input the device port No. The default value is 8000.
Device
Informaon
If you set 0 as the adding mode, this eld is not required; if you set 2 as the adding mode, input
the device ID registered on the IP Server; if you set 3 as the adding mode, input the device
domain name registered on HiDDNS server; if you set 4 as the adding mode, input the EHome
account; if you set 6 as the adding mode, input the device serial No.
User Name
Input the device user name. By default, the user name is admin.
Password
Input the device password.
Cauon
The password strength of the device can be automacally checked. We highly recommend you
change the password of your own choosing (using a minimum of 8 characters, including at
least three kinds of following categories: upper case leers, lower case leers, numbers, and
special characters) in order to increase the security of your product. And we recommend you
reset your password regularly, especially in the high security system, reseng the password
monthly or weekly can
beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
Add Oine Device
You can input 1 to enable adding the
oine device, and then the soware will automacally
connect it when the oine device comes online. 0 indicates disabling this funcon.
Export to Group
You can input 1 to create a group by the device name (nickname). All the channels of the
device will be imported to the corresponding group by default. 0 indicates disabling this
funcon.
DS-K281X Series Access Controller User Manual
36
Loading ...
Loading ...
Loading ...