Loading ...
Loading ...
Loading ...
5
Getting started
Installing the Stand or Wall Mount Bracket
Accessories List
Installing the Wall Mount Bracket
CAUTION
• Be sure to disconnect the AC power cord before installing a stand or
wall mount brackets.
• The display on your TV is fragile. Make sure the TV screen is not
scratched or damaged by hard objects or from pressure.
• After the installation is complete, make sure the TV is steady on a table
or firmly attached to a wall mount, before removing all protective film,
if any.
Installing the Stand
1. Carefully place your TV face-down on a soft, flat surface to prevent
damage to the TV or scratching to the screen.
2. Take out the Base Stand from the accessory bag and then insert the
stand into the bottom slots of the TV.
3. Secure the Base Stand to the TV with 4 screws in accessory tightly.
NOTE
• The accessories may be different from the list above due to different
models, countries/regions, please refer to the actual accessory bag.
Before mounting the TV, remove the TV stand if you have already attached it,
and make sure the wall mount bracket supports the weight of your TV.
CAUTION
When mounting the TV on a wall, follow instructions provided with the
wall mount bracket. If it is not correctly mounted, the TV may fall and cause
property damage or personal injury.
• Place spacers between the TV and bracket.
• Make sure the tilt angle between the TV screen and the vertical
surface is no more than 15 degrees.
≤15°
TV screen
Vertical
surface
Wall Mount Bracket
Wall Mount Screw
Wall Mount Spacer
Rear cover of the TV
NOTES
• The diameter and length of the screws differ depending on the wall
mount bracket model.
• Wall mount bracket is optional. Your TV may not have wall mount bracket.
Please refer to the actual accessories.
• Standard dimensions are shown below.
The following accessories are included with TV:
OWNER’S MANUAL× 1 Remote Control × 1 AAA Battery × 2
Base Stand × 2 Screw × 4
Power Cord × 1(only for
65")
For 43"/50"/55"
For 65"
Wall mount hole pattern (mm)
200 × 200
(43")
200 × 300
(50"/55")
300 × 200
(65")
Wall mount screw size M6
NOTES
• Insecure installation may cause the tilt or falling of the product, and
further lead to personal injuries or product damages.
• P-clip and corresponding screws may not included with TV set, please
purchase them by yourself if necessary.
Screws:
M5×12(65") ×4
Base stand
Base stand
8.0-10.0 mm(50
"
/55
"
)
9.5 -11.5 mm(43
"
/65
"
)
Screws:
M4×16(43") ×4
M4×12(50"/55") ×4
Base stand
Base stand
Installing the P-Clip
Please place the TV on a horizontally stable surface, and then use P-Clip to
connect the TV and the wall or pillar.
1. Fix the larger side of P-Clip to the
screw hole on the back of TV set
with a M6×12 screw.
2. Fix the other side of P-Clip to the
wall or pillar with a ST4×25 screw.
Loading ...
Loading ...
Loading ...