Loading ...
Loading ...
Loading ...
1662/1663/1664 FC
Users Manual
66
Clear Memory
To clear all memory:
1. Press to enter Memory mode.
2. Press . The primary display shows Clr. The secondary display shows
LASt.
3. Press to enable clear all memory. The display shows Clr All?
4. Press to confirm clear all memory. All memory is cleared and the Tester
returns to the measurement mode.
To delete (clear) the last valid stored result:
1. Press to enter Memory mode.
2. Press . The primary display shows Clr. The secondary display shows
LASt.
3. Press to delete the last valid stored result. The Tester returns to the
measurement mode.
Memory Error Message
To ensure data security, each data record has a CRC checksum. If the
checksum is wrong, ERR9 (inconsistent data) shows on the display at startup
or when you go to the Memory mode.
To continue:
• Download all data from the Tester memory.
• Clear the Tester memory (may take up to 2 minutes).
• If ERR9 occurs again, return the Tester to a Fluke Service Center.
1.888.610.7664 info@Fluke-Direct.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...