Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
70
Electrical connection
Risk of injury due to electric
shock.
During installation, maintenance, and
repair work, the oven must be
completely disconnected from the
power supply:
Disconnect the oven from the power
supply by tripping the breakers, or
unplugging the power cord from the
outlet. To do this, pull the plug not
the cord.
Risk of injury.
Installation, repairs, and other work
by unqualified persons could be
dangerous. Miele cannot be held
liable for unauthorized work.
Installation, maintenance, and repairs
must only be carried out by a Miele
authorized technician.
The connection data (voltage and
frequency) on the data plate of the
oven must match the power supply in
order to avoid the risk of damage to
the oven.
Compare this before connecting the
appliance to the power supply. If in
any doubt, consult a qualified
electrician.
For safety reasons, the oven may only
be used when it has been fully
installed.
The power cord plug must be
inserted into a suitable outlet that
has been installed and grounded in
compliance with all applicable local
codes.
WARNING: THIS APPLIANCE MUST
BE GROUNDED
Installer: Please pass these
instructions on to the customer.
Electrical connection
The oven is equipped with a power cord
approx. 6ft (1.8m) long with a 4-pin
NEMA 14-30P plug for connection to a
power supply with:
- 2NAC 208V, 30A, 60Hz
or
- 2NAC 240V, 30A, 60Hz
Temporary or permanent operation on
an autonomous power supply system or
a power supply system that is not
synchronized with the grid power supply
(e.g., island networks, back-up systems)
is possible. A prerequisite for operation
is that the power supply system
complies with the specifications of
EN50160 or an equivalent standard.
The function and operation of the
protective measures provided in the
domestic electrical installation and in
this Miele product must also be
maintained in isolated operation or in
operation that is not synchronized with
the grid power supply, or these
measures must be replaced by
equivalent measures in the installation.
As described, for example, in the current
version of VDE-AR-E 2510-2.
The voltage can be adjusted via setting
.
KEEP THE OPERATING AND
INSTALLATION INSTRUCTIONS IN A
SAFE PLACE.
Loading ...
Loading ...