Loading ...
Loading ...
Loading ...
Operation Guide
Interface Introduction
Conditions that must be met
1. Place on a flat surface.
2. Confirm the voltage and frequency at the outlet match with the vacuum pump
specifications.
3. Confirm the oil level is within the Min and Max level.
4.Remove the air inlet cap(1/4 SAE fitting as shown in the
right image), connect the pumped system(make sure the pipe
fitting is fit with the air inlet fitting). Tighten the air inlet and
make sure the system and hoses are sealed with no leakage.
5. Plug in the power cordand open the exhaust port.
Main interface
-4-
SVP-7 (110V)
Measure Graph Sengs System
16:22:34
Record: OFF
Start
1/4 SAE
Loading ...
Loading ...
Loading ...