Loading ...
Loading ...
Loading ...
1 Introduction
1.1 Product Features
The main features are as follows:
High performance CMOS sensor
IR cut filter with auto switch
OSD menu with configurable parameters
Auto white balance
internal synchronization
SMART IR mode
Visible alarm
PIR detection
3-axis adjustment
Alarm linkage with DVR
1.2 Overview
This manual applies to two types of the bullet camera.
The overviews of each type are shown in the figures
below.
1.2.1 Overview of Type I Camera
Video Cable
(TVI)
Power Cord
Lens
Bracket
Main Body
PIR
White Light
Source
Figure 1-1 Overview of Type I Camera
1.2.2 Overview of Type II Camera
PIR
Main Body
Bracket
Video Cable
(TVI)
Power Cord
12 VDC
Lens
White Light Source
Figure 1-2 Overview of Type II Camera Installation
2 Installation
Before you start
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your power output to avoid the damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera, and the
mount.
If the wall is cement, insert expansion bolts before
installing the camera. If the wall is wooden, use
self-tapping screws to secure the camera.
If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
Loading ...
Loading ...
Loading ...