Loading ...
Loading ...
Loading ...
Pneumatic Comparison Test Pump
Connections
5
Note
Hand-tight is sufficient; ensure that the bottom face contacts the O-ring on
the test port.
3. To adjust the position to face forward, hold the gauge adapter and turn the instrument
COUNTER-CLOCKWISE, so that it faces forward.
gla04.bmp
Figure 4. Adjust Gauge Position
4. Hold the instrument steady, while turning the gauge adapter
COUNTER-CLOCKWISE until it pulls down onto the O-ring.
gla05.bmp
Figure 5. Tighten Gauge Adapter
gla06.bmp
Figure 6. Hand Tighten Only
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...