Loading ...
Loading ...
Loading ...
10
NOTICE: When the heater is turned on for the first time, a slight odor may be present. This is normal and
should not occur again unless the heater is not used for a long period of time.
NOTICE: To improve the heater’s performance, aim the remote control at the front of the fireplace. DO NOT
press the buttons
too quickly. Give the unit enough time to respond to each command.
POWER
Turn the appliance ON/OFF.
DIMMER
Control the flame and flame bed brightness.
5 Settings: ( L1-L2-L3-L4-L5) Flame dims from L1 to L5. L5 is the brightest
setting.
NOTE: Press the "DIMMER" button for 6 seconds, the appliance will go into
sleep mode. All the lights off, the heating function goes on. Press for 6
seconds again, the appliance will back to normal mode.
TIMER
Control the timer.
8 Settings: (1h, 2h, 3h, 4h, 5h, 6h, 7h, 8h) Press the button until reach desired
setting.
FLAME
SPEED
Control the flame speed.
5 Settings: (U1-U2-U3-U4-U5) Flame speed from U1 to U5. U5 is the fastest
setting.
HEATER
Control the heater.
Press button to initiate the heater.
(OFF) no heater or blower.
( - ), heater blows warm air(MAX 500W)
( -- ), heater blows hot air(MAX 1500W)
NOTE: Heater functions cycle from (OFF) ( - )( -- )
COLOR A
Control the flame color.
4 Settings: 1.red, 2.yellow, 3.orange, 4.blue.
NOTE: Press the button for 6 seconds, the indicator will show digital "0", the
flame color and brightness will be changed automatically.
COLOR B
Control the flame bed color.
4 Settings: 1.red, 2.yellow, 3.red, 4.orange.
NOTE: Press the button for 6 seconds, the indicator will show digital "0", the
flame color and brightness will be changed automatically.
Loading ...
Loading ...
Loading ...