Loading ...
Loading ...
Loading ...
Network Video Recorder User Manual
40
If the IP camera to add has not been actiavated, you can activate it from the IP camera list on the
camera management interface.
Enable the H.265 Stream Access
The device can automatically switch to the H.265 stream of IP camera (which supports H.265
video format) for the initial access.
Go to More Settings > H.265 Auto Switch Configuration.
Check Enable H.265 (For Initial Access).
Click OK.
Upgrade the IP Camera
The IP camera can be remotely upgraded through the device.
Plug the U-flash drive with the IP camera’s firmware upgrade file to the device.
On the camera management interface, select a camera.
Go to More Settings > Upgrade at the top taskbar.
Select the firmware upgrade file from the U-flash drive.
Click Upgrade.
Result:
The IP camera will reboot automatically after the upgrading completes.
Configure the Customized Protocols
Purpose
To connect the network cameras which are not configured with the standard protocols, you can
configure the customized protocols for them. The system provides 16 customized protocols.
Click More Settings > Protocol at the top taskbar to enter the protocol management interface.
Loading ...
Loading ...
Loading ...